Diamond DVDV805-03 operation manual Trouble Shooting

Page 20

TROUBLE SHOOTING

Check the following guide for the possible cause of a problem before contacting service.

Symptom

Cause

Correction

 

 

No Power

• The power cord is disconnected.

• Plug the power cord into the wall

 

 

outlet and unit securely.

 

 

 

The power is on, but DVD

• No disc is inserted.

• Insert a disc. (Check that the DVD or au-

player does not work

 

dio CD indicator in the DVD display is lit.)

No Picture

• The TV is not set to receive DVD

• Select the appropriate video input mode

 

signal output.

on the TV so the picture from the DVD

 

 

player appears on the TV screen.

 

 

 

 

• The video cable is not connected

• Connect the video cable into the

 

securely.

jacks securely.

 

• The connected TV power is turned off.

• Turn on the TV.

No Sound

• The equipment connected with the

• Select the correct input mode of the

 

audio cable is not set to receive

audio receiver so you can listen to the

 

DVD signal output.

sound from the DVD player.

 

 

 

 

• The audio cable is not connected

• Connect the audio cable into the

 

securely.

jacks securely.

 

• The power of the equipment connected

• Turn on the equipment connected with

 

with the audio cable is turned off.

the audio cable.

 

 

 

 

• The Digital Audio Output is set to

• Set the Digital audio Output to the correct

 

the wrong position.

position, then turn on the DVD player

 

 

again by pressing the POWER button.

The playback picture is poor

• The disc is dirty.

• Clean the disc.

The DVD player does

• No disc is inserted.

• Insert a disc

not start playback

• An unplayable disc is inserted.

• Insert a playable disc. (Check the disc

 

 

type, color system and Regional code.)

 

 

 

 

• The disc is placed upside down.

• Place the disc with the playback side down.

 

• The disc is not placed with the

• Place the disc on the disc tray cor-

 

guide.

rectly inside the guide.

 

• The disc is dirty.

• Clean the disc.

 

• A menu is on the TV screen.

• Press the SET UP button to turn off

 

 

the menu screen.

 

• The Rating level is set.

• Cancel the Rating function or change

 

 

the rating level.

The Remote Control

• The remote control is not pointed at

• Point the remote control at the remote

does not work properly

the remote sensor of the DVD player.

sensor of the DVD player.

 

 

 

 

• The remote control is too far from

• Operate the remote control within

 

the DVD player.

about 23ft (7m).

 

• There is an obstacle in the path of the

• Remove the obstacle.

 

remote control and the DVD player.

 

 

• The batteries in the remote con-

• Replace the batteries with new ones.

 

trol are exhausted.

 

 

 

 

20

Image 20
Contents DVD / MP3 / CD Player Lecteur DVD / MP3 / CD Safety Certification Do not OpenSafety Instructions Read before operating equipment Getting Started Main FeaturesFeatures of audio specifications Disc types Disc manintenaceSafety precautions Front Panel Control Rear Panel ControlBattery installation remote control unit Remote Control UnitConnect To TV Pb, Cb/Pr, Cr outputConnection via Composite RCA Cable Connection via S-Video CableConnection to Amplifier DVD Setup Mode Operation TV SelectionPlay Discs Pause /StepSetup Menu Items General Setup TV DisplayAngle Mark OSD LanguageSpeaker Setup Dolby Digital SetupVideo Setup Screen SaverPreference Setup Audio KID SAF PGR Adult OFF Preference SET UPSubtitle Disc MenuPassword OLD DefaultDVD Menu Play AudioScan Progressive Scan Search Display Remain Time Play ZoomProgram Mode ProgramOperations Picture CDOperation Trouble Shooting Video GeneralCD/DVD Diamond Vision Limited Warranty Customer ObligationsProduit Laser AvertissementInstructions DE Sécurité à lire avant d’utiliser l’appareil Pour commencer Caractéristiques principalesNormes Caractéristiques des normes audioTypes de disques Entretien des disquesPrécautions de sécurité AvertissementCommandes du panneau avant Commandes du panneau arrièreCommande à distance Raccordement au téléviseur Sortie Y/Pb.Cb/Pr.CrConnexion par câble composite RCA Connexion par câble s-vidéoConnexion à l’amplificateur Mode de configuration DVD FonctionnementSélection du téléviseur Pour jouer les disquesArticles du menu de configuration Configuration Générale Affichage SUR LE TéléviseurAmarque D’ANGLE Langue OSDConfiguration Numérique Dolby Configuration VidéoÉconomiseur D’ÉCRAN StéréoConfiguration DES Préférences Audio Anglais Français Espagnol AllemandAnglais Français Espagnol Allemand Arrêt Menu DE DisqueReset MOT DE Passe AncienNouveau Vérifier DéfautMode de répétition Scan Balayage ProgressifAvance lente Sous-titresJeu RechercheAffichage temps restant Mode programme Fonctionnement Fonction MP3Images sur CD Diagnostic Vidéo GénéralitésNtsc Diamond Vision Garantie Limitée Obligations DU Client