Universal Remote Control A6 owner manual Power Component Buttons, Channel UP5

Page 16

IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.

STEP 2: Press the component button you want to turn on and then the POWER button; repeat for all other components in the order you want them to turn on. The component LED lights will blink once each time you press the POWER button.

POWER

COMPONENT

BUTTONS

STEP 3: Once you’ve entered all the Power On commands, press the CHANNEL UP 5button to save your MacroPower commands. The component LED lights will blink three times to confirm that the programming has been successfully saved.

CHANNEL

UP5

SUGGESTION: Most of the components have the same signal to turn the power On and Off. You may want to program MacroPower only in the POWER button and save the System Off button to turn components On or Off individually.

Note: If you want to program MacroPower for the SYSTEM OFF button, repeat the same steps used for Power ON programming.

Page 16

Image 16

Contents Remote Control Congratulations Table of Contents Battery Installation Getting Started OverviewControl up to 6 Components Component ButtonsCouch Mode Low Battery WarningOr dial Keypad Layout & Button Functions Programming URC-A6 using Pre-Programmed Codes Point the remote control at the componentQuick Set-Up Method Component Buttons Number PADQuick Set-up Code Tables Three-Digit Code Set-Up Method Component Buttons SelectNumber Buttons Auto-Search Method UP5 Arrow DOWN6Please do not Return Programming URC-A6 Using the Learning Method Gradually vary the distance between the two remote controls MacroPower Total System On/Off Special Advanced FeaturesProgramming Automated Activities Power Component Buttons Channel UP5Multi-commands to Macro buttons You can program up to 20 commands on each Macro buttonProgramming My Favorites Favorite Channel Buttons Press the CBL button to select the Cable modeMute Button More Favorite Channels Control from. Ex. CableDevice button lights up PressSimpleSound Total System Volume Control Now, let’s set--up SimpleSound. Here’s howRepeat Steps 1-2 for all other components Channel Control Punch Through Component Buttons Select ChannelTransport Control Punch Through Component Buttons Select PlayPress the Menu button. The component LED will blink once OSD On-Screen Display Control Punch ThroughComponent Buttons Select Menu Input Switching Macros Press TV Press Input Press Pause Press StopErasing Commands -- Overview Component Buttons EnterErasing All Learned Commands from One Component Component Buttons Pause EnterErasing MacroPower & Other Macro Commands Power System OFFErasing SimpleSound & Other Punch Through Commands Component Buttons Select VolumeFactory Reset RecordFinding a Component’s Set-up Code Number Component Buttons Select InfoPre-Programmed Code Tables 34-35CABLE/SAT Abex NAD DVD/DVR/VCR Audio AUX Lights Frequently Asked Questions What is MacroPower?What if my remote control no longer works from a distance? Who can I contact for more answers?USA Limited Warranty Statement SpecificationsPage REV020708 Information To The User Page Page Page OCE-0084ARev