
If Auto Search did not work, try this:
Programming URC-A6
using the Learning Method
STEP 1: LineuptheURC-A6totheremotecontrolyou wantto‘learn’from,head--to--headasshownbelow. Makesuretheheadsareonetotwoinchesapart.
STEP 2: On the URC-A6, press the Component button that you want to program (in this case the button that says TV) and the ENTER [ENT] button at the same time. Hold down both buttons for 2 seconds until the TV Component button light turns on. This signals that you are in programming mode.
IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.
STEP 3: Press any button on the URC-A6 that you want to teach a command to. For example, if you want to teach the MUTE button on the URC-A6 the TV Mute command from the other remote, first press the MUTE button on the URC-A6 and the TV component button LED light will blink once indicating that the URC-A6 is ready to learn the command.
STEP 4: Press and hold the MUTE button on the other remote until the component button LED on the URC-A6 blinks twice. Now you can continue learning all other buttons from your old remote by pressing the next button on the URC-A6 and repeating this step.
Note: The component LED will blink five times if there was an error in the learning process. In this case, please repeat Steps 3 and 4.