Universal Remote Control A6 owner manual OSD On-Screen Display Control Punch Through

Page 24

OSD (On-Screen Display) Control “Punch Through”

This “Punch Through” enables you to program the URC-A6 so that CBL or DVD OSD Controls (MENU, GUIDE, INFO, EXIT, SEL and 4 Cursor Controls) will also operate in other component modes on the remote control.

STEP 1: Press and hold the component button you want to add OSD Control to, such as TV or DVD, and the SELECT [SEL] button at the same time for two seconds until the Component LED light turns on.

IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.

STEP 2: Press the MENU button. The component LED will blink once.

COMPONENT

BUTTONS

SELECT

MENU

STEP 3: Press either the CBL or DVD button that you want to use as the source of OSD Control. The component LED will blink three times to confirm it is saved.

Page 24

Image 24

Contents Remote Control Congratulations Table of Contents Battery Installation Getting Started OverviewControl up to 6 Components Component ButtonsLow Battery Warning Couch ModeOr dial Keypad Layout & Button Functions Programming URC-A6 using Pre-Programmed Codes Point the remote control at the componentQuick Set-Up Method Component Buttons Number PADQuick Set-up Code Tables Three-Digit Code Set-Up Method Component Buttons SelectNumber Buttons Auto-Search Method UP5 Arrow DOWN6Please do not Return Programming URC-A6 Using the Learning Method Gradually vary the distance between the two remote controls Special Advanced Features MacroPower Total System On/OffProgramming Automated Activities Power Component Buttons Channel UP5Multi-commands to Macro buttons You can program up to 20 commands on each Macro buttonPress the CBL button to select the Cable mode Programming My Favorites Favorite Channel ButtonsMute Button More Favorite Channels Control from. Ex. CableDevice button lights up PressSimpleSound Total System Volume Control Now, let’s set--up SimpleSound. Here’s howRepeat Steps 1-2 for all other components Channel Control Punch Through Component Buttons Select ChannelTransport Control Punch Through Component Buttons Select PlayOSD On-Screen Display Control Punch Through Press the Menu button. The component LED will blink onceComponent Buttons Select Menu Input Switching Macros Press TV Press Input Press Pause Press StopErasing Commands -- Overview Component Buttons EnterErasing All Learned Commands from One Component Component Buttons Pause EnterErasing MacroPower & Other Macro Commands Power System OFFErasing SimpleSound & Other Punch Through Commands Component Buttons Select VolumeFactory Reset RecordFinding a Component’s Set-up Code Number Component Buttons Select InfoPre-Programmed Code Tables 34-35CABLE/SAT Abex NAD DVD/DVR/VCR Audio AUX Lights Frequently Asked Questions What is MacroPower?What if my remote control no longer works from a distance? Who can I contact for more answers?USA Limited Warranty Statement SpecificationsPage REV020708 Information To The User Page Page Page OCE-0084ARev