Universal Remote Control A6 owner manual Frequently Asked Questions, What is MacroPower?

Page 40

Frequently Asked Questions

If the batteries run out, will I lose my settings?

No. The URC-A6 stores all of your settings in non-volatile FLASH memory. You could remove the batteries for months, replace them at your convenience, and the URC-A6 would still remember your settings.

What is MacroPower?

MacroPower is a very useful way to make a lot of things happen with one button push. For example, in most home theaters, to watch television, the user must turn on the TV, then turn on the Cable Box or the Satellite Receiver, then turn on the Surround Sound system for sound. Instead of pressing all of those buttons one at a time, MacroPower enables you to turn on all of these components, in the sequence you want, with one button push. For more information on why and how you should program MacroPower commands, refer to page 18 in this Manual.

What if my remote control no longer works from a distance?

Replace the batteries with new Alkaline batteries.

Who can I contact for more answers?

The Universal Remote Control technical support and customer service staff are ready to answer any questions you might have.

E-Mail us at techsupport@universalremote.com Visit our website www.universalremote.com Call us at 1-800-901-0800

Monday - Friday, 9AM to 6PM (EST)

Page 40

Image 40

Contents Remote Control Congratulations Table of Contents Battery Installation Getting Started OverviewControl up to 6 Components Component ButtonsCouch Mode Low Battery WarningOr dial Keypad Layout & Button Functions Programming URC-A6 using Pre-Programmed Codes Point the remote control at the componentQuick Set-Up Method Component Buttons Number PADQuick Set-up Code Tables Three-Digit Code Set-Up Method Component Buttons SelectNumber Buttons Auto-Search Method UP5 Arrow DOWN6Please do not Return Programming URC-A6 Using the Learning Method Gradually vary the distance between the two remote controls MacroPower Total System On/Off Special Advanced FeaturesProgramming Automated Activities Power Component Buttons Channel UP5Multi-commands to Macro buttons You can program up to 20 commands on each Macro buttonProgramming My Favorites Favorite Channel Buttons Press the CBL button to select the Cable modeMute Button More Favorite Channels Control from. Ex. CableDevice button lights up PressSimpleSound Total System Volume Control Now, let’s set--up SimpleSound. Here’s howRepeat Steps 1-2 for all other components Channel Control Punch Through Component Buttons Select ChannelTransport Control Punch Through Component Buttons Select PlayPress the Menu button. The component LED will blink once OSD On-Screen Display Control Punch ThroughComponent Buttons Select Menu Input Switching Macros Press TV Press Input Press Pause Press StopErasing Commands -- Overview Component Buttons EnterErasing All Learned Commands from One Component Component Buttons Pause EnterErasing MacroPower & Other Macro Commands Power System OFFErasing SimpleSound & Other Punch Through Commands Component Buttons Select VolumeFactory Reset RecordFinding a Component’s Set-up Code Number Component Buttons Select InfoPre-Programmed Code Tables 34-35CABLE/SAT Abex NAD DVD/DVR/VCR Audio AUX Lights Frequently Asked Questions What is MacroPower?What if my remote control no longer works from a distance? Who can I contact for more answers?USA Limited Warranty Statement SpecificationsPage REV020708 Information To The User Page Page Page OCE-0084ARev