Universal Remote Control A6 More Favorite Channels, Control from. Ex. Cable, Press Select

Page 19

More Favorite Channels

You can also use the "A, B, C and D" buttons to program favorite channels. Each button can program up to 5 favorite channels (or a total of 20 button presses), but you're not limited to using these buttons for only that. You can record any series of button presses into a macro. This is great switching video or audio sources. Here is an example of how to program a macro on the "A" button with three favorite channels. We'll use "25, 50, and 75."

STEP	1: Press the device you are getting channel
	control from. Ex. Cable.
STEP	2: Press and hold the "A" button and
	"Mute" button at the same time until a
	device button lights up.
STEP	3: Press "2".
STEP	4: Press "5".
STEP	5: Press "Select".
STEP	6: Press "Stop".
STEP	7: Press "5".
STEP	8: Press "0".
STEP	9: Press "Select".

STEP 10: Press "Stop".

STEP 11: Press "7".

STEP 12: Press "5".

STEP 13: Press "Select".

STEP 14: Press "Stop".

STEP 15: Press "Channel Up" to save macro.

Note: Pressing the "Select" button just assures the quickest response from the Cable box. Pressing "Stop" allows you to program several favorite channels on one button. Now, the first press of the "A" button will change the channel to "25." The second, to "50" and the third, to "75." Then the sequence starts all over again.

Page 19

Image 19

Contents Remote Control Congratulations Table of Contents Component Buttons Battery InstallationGetting Started Overview Control up to 6 ComponentsCouch Mode Low Battery WarningOr dial Keypad Layout & Button Functions Component Buttons Number PAD Programming URC-A6 using Pre-Programmed CodesPoint the remote control at the component Quick Set-Up MethodQuick Set-up Code Tables Component Buttons Select Three-Digit Code Set-Up MethodNumber Buttons UP5 Arrow DOWN6 Auto-Search MethodPlease do not Return Programming URC-A6 Using the Learning Method Gradually vary the distance between the two remote controls MacroPower Total System On/Off Special Advanced FeaturesProgramming Automated Activities Channel UP5 Power Component ButtonsYou can program up to 20 commands on each Macro button Multi-commands to Macro buttonsProgramming My Favorites Favorite Channel Buttons Press the CBL button to select the Cable modeMute Button Press More Favorite ChannelsControl from. Ex. Cable Device button lights upNow, let’s set--up SimpleSound. Here’s how SimpleSound Total System Volume ControlRepeat Steps 1-2 for all other components Component Buttons Select Channel Channel Control Punch ThroughComponent Buttons Select Play Transport Control Punch ThroughPress the Menu button. The component LED will blink once OSD On-Screen Display Control Punch ThroughComponent Buttons Select Menu Press TV Press Input Press Pause Press Stop Input Switching MacrosComponent Buttons Enter Erasing Commands -- OverviewComponent Buttons Pause Enter Erasing All Learned Commands from One ComponentPower System OFF Erasing MacroPower & Other Macro CommandsComponent Buttons Select Volume Erasing SimpleSound & Other Punch Through CommandsRecord Factory ResetComponent Buttons Select Info Finding a Component’s Set-up Code Number34-35 Pre-Programmed Code TablesCABLE/SAT Abex NAD DVD/DVR/VCR Audio AUX Lights Who can I contact for more answers? Frequently Asked QuestionsWhat is MacroPower? What if my remote control no longer works from a distance?Specifications USA Limited Warranty StatementPage REV020708 Information To The User Page Page Page OCE-0084ARev