Universal Remote Control A6 owner manual Erasing Commands -- Overview, Component Buttons Enter

Page 26

Erasing Commands -- Overview

You can erase a single learned command, all learned commands in each component mode, SimpleSound programming, MacroPower commands, or re-set the remote to original factory default settings.

Erasing a Single Learned Command from One Component

STEP 1: Press the component button where the learned command is stored and the ENTER buttons at the same time for two seconds until the component LED light turns on.

IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over.

COMPONENT

BUTTONS

ENTER

STEP 2: Press and hold the button you want to erase for two seconds. The component LED light will blink twice to confirm the erasure.

STEP 3: Repeat Step 2 to erase any other buttons in the selected component mode.

STEP 4: To exit Erase mode, press and hold both the component button and the ENTER (ENT) button at the same time until the component LED light blinks three times.

Page 26

Image 26

Contents Remote Control Congratulations Table of Contents Control up to 6 Components Battery InstallationGetting Started Overview Component ButtonsOr dial Low Battery WarningCouch Mode Keypad Layout & Button Functions Quick Set-Up Method Programming URC-A6 using Pre-Programmed CodesPoint the remote control at the component Component Buttons Number PADQuick Set-up Code Tables Three-Digit Code Set-Up Method Component Buttons SelectNumber Buttons Auto-Search Method UP5 Arrow DOWN6Please do not Return Programming URC-A6 Using the Learning Method Gradually vary the distance between the two remote controls Programming Automated Activities Special Advanced FeaturesMacroPower Total System On/Off Power Component Buttons Channel UP5Multi-commands to Macro buttons You can program up to 20 commands on each Macro buttonMute Button Press the CBL button to select the Cable modeProgramming My Favorites Favorite Channel Buttons Device button lights up More Favorite ChannelsControl from. Ex. Cable PressSimpleSound Total System Volume Control Now, let’s set--up SimpleSound. Here’s howRepeat Steps 1-2 for all other components Channel Control Punch Through Component Buttons Select ChannelTransport Control Punch Through Component Buttons Select PlayComponent Buttons Select Menu OSD On-Screen Display Control Punch ThroughPress the Menu button. The component LED will blink once Input Switching Macros Press TV Press Input Press Pause Press StopErasing Commands -- Overview Component Buttons EnterErasing All Learned Commands from One Component Component Buttons Pause EnterErasing MacroPower & Other Macro Commands Power System OFFErasing SimpleSound & Other Punch Through Commands Component Buttons Select VolumeFactory Reset RecordFinding a Component’s Set-up Code Number Component Buttons Select InfoPre-Programmed Code Tables 34-35CABLE/SAT Abex NAD DVD/DVR/VCR Audio AUX Lights What if my remote control no longer works from a distance? Frequently Asked QuestionsWhat is MacroPower? Who can I contact for more answers?USA Limited Warranty Statement SpecificationsPage REV020708 Information To The User Page Page Page OCE-0084ARev