Programming URC-A6 using
Pre-Programmed Codes
There are three different ways you can program your URC-A6 using the component brand codes that are pre-programmed into the remote. One of these will work for you!
•Quick Set-Up Method
•Three-Digit Code Entry Method
•Auto-Search Method
* * *
TRY THIS FIRST!
Quick Set-Up Method
STEP 1: Manually or using your old remote, turn on the component you want to program—for example, to program your TV, turn on your TV set.
STEP 2: Point the URC-A6 toward the component that you want to program (in this case the TV set) and press and hold the component button (in this case the TV button).While holding down the component button, begin to press the numeric assigned to your brand in the Quick Set-up Code Table(See Page 8) and release both Component button and the number key to save the code.
The component LED light will blink three times to confirm that the code has been stored.
STEP 3: Point the remote control at the component.
STEP 4: Press the power button. If it turns off, it is programmed for your component. If it does not turn off, use the Pre-Programmed Three-Digit Code Set-Up Method or Auto-Search Method.
COMPONENT
BUTTONS
NUMBER
PAD