Universal Remote Control A6 owner manual Multi-commands to Macro buttons

Notes regarding programming

multi-commands to Macro buttons:

•You can program up to 20 commands on each Macro button.

•You can program delays in between commands by pressing the PAUSE button. Each press adds a one-half second delay.

•Also, if you add the delay time as the first step of Macro commands, the remote will not send the Macro unless the button is held for two seconds. (This is the Press & Hold Function).

•You can also program macro commands in ‘layers’ by pressing the STOP button in between commands. (For example, if you press CBL, 009, STOP, 035, STOP, 365, STOP and the CH+ button in Step 2) the remote will send out 009 at the first press of the ‘A’ button, and then send out 035 at the second press, etc.

•You cannot program the CH+ or PAUSE buttons as macro commands.

PLEASE DO NOT RETURN

THIS PRODUCT TO THE STORE

PLEASE CONTACT OUR TECHNICAL

SUPPORT CENTER

IF YOU NEED ASSISTANCE, E-MAIL

techsupport@UniversalRemote.com

or dial 1-800-901-0800

(9:00AM-6:00PM EST)

Page 17