Toshiba 51HX94 owner manual Overview of cable types, To a Personal Computer PC

Chapter 2: Connecting your TV

Overview of cable types

NOTE: NEVER CONNECT THIS TV

TO A PERSONAL COMPUTER (PC).

THIS TV IS NOT INTENDED FOR USE WITH A PC.

Note: Two dual-wand IR blaster/G-LINK cables are included with your TV. All other required cables, if not provided with your other devices, can be purchased at many electronics accessory suppliers.

●Coaxial (F-type) cable is used for connecting your antenna, cable TV service, and/or cable converter box to the ANT-1 and/or ANT-2 RF inputs on your TV.

●Standard A/V cables (composite video) usually come in sets of three, and are for use with video devices with standard audio and standard (composite) video output. These cables (and the related inputs on your TV) are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio.

●S-video cable is for use with video devices with S-video output. Separate audio cables are required for a complete connection.

Note: An S-video cable provides better picture performance than a composite video cable. If you connect an S-video cable, be sure to disconnect the standard (composite) video cable or the picture performance will be unacceptable.

●Component video cables come in sets of three and are for use with video devices with component video output. (ColorStream¨ is ToshibaÕs brand of component video.) These cables are typically color-coded red, green, and blue. Separate audio cables are required for a complete connection.

Note: Component video cables provide better picture performance than a standard (composite) video or S-video cable.

●HDMI cable is for use with devices with HDMI (high-definition multimedia interface) output. HDMI cable delivers digital audio and video in its native format. This cable carries both video and audio information; therefore, no separate audio cables are required for a complete HDMI device connection. See page 19 for further details.

Note: HDMI cable provides better picture performance than a standard (composite) video or S-video cable.

●IEEE-1394 cable is for use with video devices with compressed digital video output that meets CEA specifications for IEEE-1394. This cable carries both video and audio information; therefore, no separate audio cables are required for a complete connection. See pages 22Ð24.

Note:

•The transmission capability of IEEE-1394 cable used with this TV must be S400 (400 Mbps maximum).

•IEEE-1394 cable provides better picture performance than a standard (composite) video or S-video cable.

●Dual-wand IR blaster/G-LINK™ cable is for use with video devices with IR (infrared) remote control. Two of these cables are included with your TV. One is for connection to the G-LINK jack (page 25) to enable TV Guide On Screenª recording features (Chapters 5 and 7). The other can be used with the TVÕs IR pass-through feature (page 21) and TheaterNet on-screen device control feature (page 44).

Note: The two IR blaster/G-LINK cables included with your TV have specific characteristics that allow them to work properly with this TV’s IR OUT and G-LINK ports. Never use other aftermarket IR blaster or G-LINK cables with this TV. Other cables may not function properly and can cause damage. THIS TYPE OF DAMAGE IS NOT COVERED BY YOUR TOSHIBA WARRANTY.

Coaxial (F-type) cable

Standard A/V cables (red/white/yellow)

S-video cable

Component video cables (red/green/blue)

HDMI cable

IEEE-1394 cable (4-pin)

Dual-wand IR blaster/G-LINK cable

(2 included)

Optical audio cable

Note: Although your TV includes both HDMI and IEEE-1394 connections, it may not operate with another device you have that includes such a connection. For example, the IEEE-1394 ports are not intended to operate with current model Mini DV camcorders, and the HDMI input is not intended for connection to a computer. Copyright protection requirements may also prohibit or limit connectivity. See page 19 for details about the HDMI input. See pages 22–24 for details about the IEEE-1394 ports.

●Optical audio cable is for connecting receivers with Dolby¨ Digital or PCM (pulse-code modulation) optical audio input to the TVÕs DIGITAL AUDIO OUT jack. See page20.

__________

Dolby is a registered trademark of Dolby Laboratories.

Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. 11

51,57HX94(E)009-11 11 9/12/04, 6:59 PM