Toshiba 51HX94 Using the Night Mode feature, Using CableClear DNR digital noise reduction

Chapter 8: Using the TV’s features

Adjusting the picture (continued)

Using the Night Mode feature

The Night Mode feature can be activated to reduce eye strain when the room is dark.

To activate the Night Mode:

1.Press MENU and open the VIDEO menu.

2.Highlight ADVANCED PICTURE SETTINGS and press

ENTER.

3.Press z to highlight the NIGHT MODE field, and then press • to select ON.

Video

Picture Settings

Theater Settings

Advanced Picture Settings

Navigate	Select	DVD RTN	Back	EXIT	Exit
		CH RTN

4.To temporarily save the new settings, highlight DONE and press ENTER.

To permanently save the new settings, highlight SAVE and press ENTER.

Note:

•When the Night Mode feature is ON, the CONTRAST setting (page 77) is not adjustable.

To deactivate the Night mode:

Select OFF in step 3 above.

Using CableClear™ DNR (digital noise reduction)

The CableClear™ digital noise reduction feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing back a video cassette or disc damaged by repeated use.

NOTE: The CableClear DNR feature does not function in HDMI (DVI), ATSC, IEEE-1394, and digital Cable modes.

To turn on CableClear DNR:

1.Press MENU and open the VIDEO menu.

2.Highlight ADVANCED PICTURE SETTINGS and press

ENTER.

3.Press z to highlight the CABLECLEAR DNR field, and then press • to select AUTO.

Video

Picture Settings

Theater Settings

Advanced Picture Settings

Navigate	Select	DVD RTN	Back	EXIT	Exit
		CH RTN

4.To temporarily save the new settings, highlight DONE and press ENTER.

To permanently save the new settings, highlight SAVE and press ENTER.

NOTE:

•If the current input is Antenna, Video 1, Video 2, or Video 3, the menu will display the text “CableClear.”

•If the current input is ColorStream HD1 or ColorStream HD2, the menu will display the text “DNR.”

•If the current input is HDMI or IEEE-1394, the menu will display the text “DNR” and will be “grayed out” to indicate that the feature does not function in this input.

To turn off CableClear DNR:

Select OFF in step 3 above.

78 Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.

51,57HX94(E)077-83 78 9/12/04, 10:05 PM