Chapter 8: Using the TV’s features
Adjusting the audio (continued)
Using the SRS WOW™ surround sound feature
WOW is a special combination of SRS Labs audio technologies (SRS 3D, FOCUS, and TruBass) that creates a thrilling surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer, and wider.
To adjust the WOW settings:
1.Put the TV in STEREO mode (see “Selecting stereo/SAP broadcasts” on page 81).
2.Press MENU and open the AUDIO menu.
3.Highlight ADVANCED AUDIO SETTINGS and press
ENTER.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Navigate |
| Select | DVD RTN | Back | EXIT | Exit |
| CH RTN |
4.Press z or y to highlight the WOW feature you want to adjust, and then press x or • to adjust the item.
•3D — To turn the surround sound effect on or off.
Note: If the broadcast is monaural, the 3D effect does not work.
•Focus — To turn the vocal emphasis effect on or off.
•TruBass — To select the desired bass expansion level (HIGH, LOW, or OFF).
5.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.
To reset the WOW settings:
Highlight RESET in the Advanced Audio Settings menu and press ENTER.
________
Manufactured under license from Dolby Laboratories. Dolby, Virtual Dolby Digital, and the
SRS WOW, SRS, and the 
logo are trademarks of SRS Labs, Inc. SRS WOW technology is incorporated under license from SRS Labs, Inc.
Using the Dolby Virtual® with SRS TruSurround™ sound feature
The Dolby Virtual with SRS TruSurround sound feature allows you to enjoy virtual surround sound from the TV’s speakers.
•For digital input sources (digital antenna/cable or
•For stereo analog input sources or sources with less than
To turn on Dolby Virtual with SRS TruSurround:
1.Press MENU and open the AUDIO menu.
2.Highlight ADVANCED AUDIO SETTINGS and press
ENTER.
3.Press z to highlight DOLBY VIRTUAL SRS TRUSURROUND, and then press • to select ON.
4.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.
To turn off Dolby Virtual with SRS TruSurround:
Select OFF in step 3 above.
Note: The Dolby Virtual SRS TruSurround and SRS WOW 3D features cannot be on at the same time. If you set one to ON, the other will automatically be set
to OFF.
Selecting the optical audio output format
Use this feature to select the optical audio output format when you connect a Dolby Digital decoder or other digital audio system to the OPTICAL AUDIO OUT jack on the TV (see “Connecting a digital audio system” on page 20).
To select the optical audio output format:
1.Press MENU and open the AUDIO menu.
2.Highlight AUDIO SETUP and press ENTER.
3.Press z to highlight the OPTICAL OUTPUT FORMAT field, and then press • to select either DOLBY DIGITAL or PCM, depending on your device.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Navigate |
| Select | DVD RTN | Back | EXIT | Exit |
| CH RTN |
4.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. | 83 |
|
83 | 9/12/04, 10:06 PM |