Toshiba 51HX94 owner manual To view premium Cable channels, To view the DVD player, To view VCR

Chapter 2: Connecting your TV

Connecting a DVD player with S-video, a VCR, and a Cable box

You will need:

￿five coaxial cables

￿two sets of standard A/V cables

Note: If you have a mono VCR, connect L/MONO on the TV (VIDEO 1) to your VCR’s audio out jack using the white audio cable only.

￿one S-video cable

￿one pair of standard audio cables

Note:

• If your DVD player does not have S-video, use a standard

video cable instead. Do not connect an S-video cable and a

standard video cable to VIDEO 1 (or VIDEO 2) at the same

time or the picture performance will be unacceptable.

From antenna or Cable TV

Cable box			Cable splitter	IN
	CH 3	IN	OUT
OUT
	CH 4		OUT
	Stereo VCR
			VIDEO	L
	IN from ANT
		CH 3		IN

CH 4

OUT to TV

OUT

TV

• If your DVD player has component video, see page 17.

• Do not connect the DVD player and VCR to the same set of

A/V inputs on the TV. (See the illustration, which shows the

VCR connected to VIDEO 1 on the TV, and the DVD player

connected to VIDEO 2.)

￿ To view basic channels and access the TV’s features:

Select the ANT 2 video input source.* Use the TV

controls to change channels and access the TVÕs features.

OUT 1

OUT 2

TheaterNet

				IN
				AUDIO
VIDEO 1	VIDEO 2	COLOR	COLOR
		STREAM	STREAM
		HD-1	HD-2
S-VIDEO	S-VIDEO			R	L
		Y	Y	2
		PB	PB	1
	VIDEO	PR	PR	VIDEO
L/	L/			L/
			L	MONO
		AUDIO	AUDIO	AUDIO
			R	R	R

TheaterNet

IEEE1394 EJECT

1

2

HDMI IN

2

1

CableCARD™

G-LINK

ANT1
(CABLE)
ANT2
ANT (75	)

￿ To view premium Cable channels:

Turn OFF the VCR. Select the ANT 1 video input

source.* Tune the TV to channel 3 or 4 (whichever

channel is vacant in your area). Use the Cable box

IN OUT

DIGITAL AUDIO OUT

AUDIO

OUT

L

controls to change channels.

S-VIDEO VIDEO

OUTOUT

R

or…Turn ON the VCR. Tune the VCR to channel 3 or 4 (whichever channel is vacant in your area). Select the VIDEO 1 video input source.* Use the Cable box controls to change channels.

Note: When you use a Cable box, you may not be able to use the remote control to program or access certain features on the TV.

￿To view the DVD player:

Turn ON the DVD player. Select the VIDEO 2 video input source.*

￿To view VCR 1:

Turn ON the VCR. Select the VIDEO 1 video input source on the TV.*

or…Turn ON the VCR. Select the ANT 1 video input source.* Tune the TV to channel 3 or 4 (whichever channel is vacant in your area).

_____________

*To select the video input source, press INPUT on the remote control (see page 67). To program the TV remote control to operate other devices, see Chapter 3.

DVD player with S-video

Note: The VIDEO/AUDIO OUT jacks output the signals from the ANT 1,

ANT 2, VIDEO 1, VIDEO 2, or VIDEO 3 jacks when the appropriate input mode is selected.

￿To enable the TV Guide On Screen system to work with your cable box and to use the TV Guide On Screen recording features:

1.Connect the G-LINK cable according to the instructions on page 25.

2.Make sure the VCR is connected to the A/V OUT jacks on the TV (see illustration).

3.Set the VCR to the appropriate line input (refer to your VCR ownerÕs manual for details), and then turn OFF the VCR.

4.See Chapter 5 for details on setting up the TV Guide On Screen system.

5.See Chapter 7 for details on using the TV Guide On Screen system.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

16 Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.

51,57HX94(E)012-25 16 9/12/04, 7:01 PM