Toshiba TLP261, TLP260, TLP560, TLP561 Press Camera Gain +/- to improve view of a, Put back the arm

Picture projection with the document imaging camera (continued)

CONTENTS 58

Camera control panel

LOCK	W.BALANCE	ARM LIGHT
	CAMERA	CAMERA
	GAIN

6

6	GAIN	Press CAMERA GAIN (+/-) to improve view of a
	CAMERA	camera subject which is too dark or vivid.

Notes

•You can adjust the “Sharpness” of the camera image on the menu screen. 46

•If the image flickers due to a fluorescent light in the room, either turn off the fluorescent light or set the “Shutter” on the menu screen. 46

Note that the image may still flicker due to the lighting, the document status, the image adjustment, etc., even if the “Shutter” setting is changed.

7	When finished, turn off the light and close it,
	and put back the arm.

Follow the steps of “Preparation of the document imaging camera” in reverse.

Notes

•The light turns off automatically when the arm is inclined.

•When the arm is not raised up, the camera source cannot be projected.

•In the camera input selected, the sound is not emitted.

imagingDocument camera