Toshiba TLP560, TLP260, TLP261, TLP561 owner manual Specifications, Main unit

Page 77

Specifications

CONTENTS

77

Main unit

Power consumption	TLP560/TLP260: 240W (Standby: 15W)
	TLP561/TLP261: 250W (Standby: 15W)
Mass	TLP560/TLP260: 3.7kg
	TLP561/TLP261: 4.3kg
Dimensions	TLP560/TLP260: 260 x 95.5 x 295 (mm)
(Except the protrusion parts)	(W/H/D)
	TLP561/TLP261: 260 x 95.5 x 352 (mm)
	(W/H/D)
Cabinet Material	PC+ABS resin and ABS resin
Ambient environment	Temperature : 0 deg. to 35 deg.
	Humidity : 30% to 70% RH
Lamp	High pressure mercury lamp
Projection screen size	30 to 180 inches
Projection distance	0.70 to 3.63m
Speaker	1W (monaural)
Connectors
• COMPUTER IN	Mini D-sub 15-pin Analog RGB/Y/PB/PR (combination)
• COMPUTER OUT	Mini D-sub 15-pin Analog RGB/Y/PB/PR (combination)
• S-VIDEO IN	Mini DIN 4-pin
• VIDEO IN	1V(p-p), 75Ω, RCA pin jack
• AUDIO IN	1.3V(rms), more than 22kΩ, ø3.5mm stereo mini jack
• CONTROL	Mini DIN 8-pin (RS-232C)
• USB	Type B

Liquid crystal display

Projection system	3-panel transmission
Panel size	0.7 inches
Driving system	TFT active matrix
Picture elements
TLP560/TLP561:	786,432 pixels (1024 x 768 dots) (H./V.) x 3
TLP260/TLP261:	480,000 pixels (800 x 600 dots) (H./V.) x 3

Projection lens

Lens	Zooming lens
	F=2.0 to 2.4 f=14.5 to 17.4mm
Focusing	Manual operation
Zooming	Manual operation

Document imaging camera (with camera model)

Lens	F = 2.8, f = 3.4mm
Focusing	Manual operation
Zoom	None (adjusted by distance to subject)
Iris	Auto./Manual
Image element	1/3 inch CCD
Effective pixels for pickup section
	805,486 pixels (1034 x 779 dots) (H./V.)
Lighting	LED light (class 2)

Others

Continued

Image 77

Contents TLP560/TLP260 TLP260Safety Precautions Avoid Volatile Liquid Save Original Packing MaterialsMoisture Condensation Exemption ClausesVentilation Power SourcesSource of Light Important Safety Instructions Object and Liquid Entry AccessoriesDo not place the product vertically Stack InhibitedReplacement Parts Damage Requiring ServiceSafety Check ServicingHeat could erase or discolor the letters on a thermal paper Do not carry by the camera armDo not move the projector while the arm is still erect Do not look into the arm light while it is litBefore Power supply cord selectionContents Anti-theft lock hole Names of each part on the main unitSpeakerLens Carrying handle ON/STANDBY button Names of each part on the main unitControl connector 26 72 RS-232C connector USB connectorVideo in connector Computer OUT connectorFreeze button Names of each part on the remote controlLoading batteries Install the batteriesOpen the cover Attach the coverFront side Rear side Remote control operationFloor-mounted projector placement Side view Determine the screen size projected on the screenInsert the other end into a wall outlet Connect the power cordTake off the lens cover Lens shift function Turn clockwise to lift up Turn counterclockwise to lower Turn the foot adjuster to make fine adjustment to the heightCeiling-mounted projector placement Connecting a computer Audio in jack Connecting video equipmentSet for use as analog RGB input Projector operation control by a computer How to use the output connector Lamp indicator blinks while the lamp is warming up Remote controlProjection on the screen Press ON/STANDBYPress Enter to confirm Turn on the connected equipment and put it in playback modeControl panel Main unit side LanguagePress Input and hold for two seconds Select the input source by pressing Input repeatedlyPress Enter Input source selection menu appearsFocusing ring Adjust the picture size by turningZooming lever Focus on the picture by turningPress the button to decrease volume Press VOL/ADJ +/- to adjust volumePress the + button to increase volume Press ON/STANDBY again Turning the power offPress ON/STANDBY after using the projector Input full screen video signals from the input Adjusting the picture automaticallySource computer and project the image Press Auto SETTo finish the adjustment, press Exit repeatedly Adjust the distortion with the selection buttonsCorrecting the keystone distortion Press KeystoneCutting off the picture and sound temporarily Icon appears in the mute modePress Mute Sound and picture are cut off temporarilyFreezing the picture Icon appears in the freeze modePress Freeze Picture freezesEnlarging the picture size Icon appears in the resize modePress Resize To reduce the enlargement ratio, press the Resize buttonSub-picture is displayed Displaying PIP Sub-picturesPress PIP Press Call Displaying InformationStart a presentation on the computer Operating the presentation modeSelect the computer input with Input Adjust the projector before presentation if necessaryPress P.MODE and hold for two seconds Change a slide with the selection buttonsPress Menu Operating the menu screenStart Adjust with VOL/ADJ +/- or selection buttonsAdjust the image flicker Guide Menu adjustments and settingsReset Full Menu adjustments and settings PictureFull Menu adjustments Position Full Menu adjustments Color Full Menu adjustments and settings Audio Menu background is normal Reset Full Menu adjustments and settings DisplayFull Menu settings Default setting Full Menu settings Reset PIP menu setting ImagingDocument camera Part names of the document imaging camera modelPreparation of the document imaging camera Set a document to be projected Press ARM LightCamera control panel Light turns onPicture projection with the document imaging camera Press Camera to select the camera input modePress Camera Gain +/- to improve view of a When finished, turn off the light and close itCamera subject which is too dark or vivid Put back the armScreen Locking the white balanceProject a white paper and enlarge it to fill With the document camera operating, fully Correcting illuminated defectsCover the camera lens with a piece of black Paper or clothTrouble indications IndicatorsControl panel Main unit sideUnplug the power cord Take off the front cover Air filter cleaningClean the air filter Detach the air filterLens side to fix it Mount the air filter and the filter frameMount the front cover Cleaning the lens Lens and main unit cleaningCleaning the main unit Replacing the intake, exhaust fans and air filterUnplug the power cord Wait until the lamp gets cool enough Lamp replacementTake off the lamp cover on the bottom panel Pull out the lampLoad a new lamp Reset the lamp timerAttach the lamp cover Slide the cover into place and tighten the two screwsSymptom Cause Correction Before calling service personalBefore calling service personal Pin assignment of Computer IN, Computer OUT connector Applicable computer signal Applicable signalCompatible Video and S-Video signal Applicable signalSignal assignment of RS-232C Interface format Controlling the projector by using RS-232CControlling the projector by using RS-232C VLU Computer Resize Main unit SpecificationsReplacement lamp Specifications