Toshiba TDP-MT200 owner manual Cutting off the picture temporarily Mute, Freezing the image Freeze

Page 27

English Français Español Deutsch Italiano Português Svenska

Cutting off the picture temporarily (Mute)

When you want to project the images of another projector, overhead

Remote

projector, etc. temporarily, this projector’s images can be turned off.

Control

Press the remote control’s MUTE button.

The picture is cut off. (The Mute function is released when pressing the MUTE button again.)

Notes

• The

icon will appear while mute is in effect.

Operating any other functions will also cancel the muting.

Freezing the image (Freeze)

Remote

The image being projected can be frozen. This function is to be used to Control pause a video during a presentation, etc.

Press the remote control’s FREEZE button.

The picture pauses. (The Freeze function is released when pressing the FREEZE button again.)

Notes

The icon will appear while freeze is in effect.

Other operation will also release the freeze.

Even if an image is frozen on the projector, the pictures are running on the video or other equipment.

If you use this function on video software sold on the market, broadcast or broadcast on cable except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws.

Operations

27

Image 27
Contents TDP-MT200 USA only Safety PrecautionsBefore Using Ventilation Important Safety InstructionsPower Sources Source of LightWater and Moisture Power-Cord ProtectionCleaning HeatImportant Safety Instructions Accessories Damage Requiring ServiceServicing Replacement Parts Safety CheckDo not use the product in a closed installation state Save Original Packing Materials Power Supply Cord SelectionImportant Precautions Place and Manner of InstallationExemption Clauses Important Precautions Avoid Volatile LiquidOther Cautions and Informations Remote Control BatteriesContents Others Checking the package contents 108 11 Names of each part on the main unitNames of each part on the control panel and remote control Parts on the rear panel Remove the battery cover Insert the dry-cell batteries Preparing and using the remote controlLoading dry-cell batteries into the remote control Operating the remote controlScreen As seen from above PlacementPlacement Styles Projection Distance and SizeBefore connection ConnectionConnecting the power cord Turning the power onRemoving the lens cover Press the ON/STANDBY button again Turning the power on and offTurning the power off Press the ON/STANDBY buttonPress the Input button Turn on the powerBasic operations Activate the connected deviceBasic operations Projector placement angle adjustmentsAdjusting the screen size and focus To adjust the horizontal angle, use the tilt adjusterUsing handy features Using auto settingCorrecting the keystone distortion Manual adjustments and settings Using handy featuresFreezing the image Freeze Press the remote control’s Mute buttonPress the remote control’s Freeze button Cutting off the picture temporarily MuteHow to use the menus Using the menusImage adjustment menu Using the menu Display setting menuScreen size Auto Default setting menuNo signal Sets the lamp power Low StandardVersion Firmware version Note Displaying Information Status displayLamp replacement When the lamp is brokenAbout lamp Lamp replacement Replacing cooling fans Lens and main unit cleaningLens cleaning Main unit cleaningLamp went out during use, or won’t come on No powerPower went out during use Trouble indicationsBefore calling service personnel Separately sold product SpecificationsList of general specifications SpecificationSVGA85 List of supported signals RGB signalsList of supported signals DVI signals SpecificationsList of supported signals Y/PB/PR signals List of supported signals Video, S-Video signalsPin assignment of Computer terminal Pin arrangement for the DVI-D terminal D V I D Interface format Main CommandsControl terminal Pin assignment