
Using the menus
You can call up
■How to use the menus
The menu shown below is for operation instructions purposes and might differ from the actual display.
1. Press the MENU button Display the Setting display menu
2. Select a Category
Select a category by using .
There are following four categories:
Image adjustment menu p.29
Display setting menu | p.30 |
Default setting menu | p.31 |
Status display menu | p.32 |
Displays the current adjustments and settings of selected category.
Item shown with gray cannot be adjusted with the current input source.
3. Adjustments & Settings
Press
to open the menu.
Item
Adjustment/Setting Value
These marks signify the items can be adjusted/set
by using .
These marks signify the items can be selected from the list by using .
After an item is selected, apply it by pressing .
This mark signfy that there are options.
Press to display a list of options.
5.End
Press the MENU
button
The menu disappears.
The figure shows displays given for operation instructions purposes. As the display may differ depending on the item, use the following pages as a reference.
| 4. Back |
Note | Return button |
|
•Menu adjustments and settings are saved when the power is turned off via the ON/ STANDBY button. If the power cable is disconnected before this, or the power goes out, then the data will not be saved.
28