Toshiba TDP-MT200 Specifications, List of general specifications, Separately sold product

Page 38

Specifications

■List of general specifications

		Item		Specification

	Consumption Power		300 W
	Weight		2.8 kg
	External Dimensions		298 ⋅ 101.4 ⋅ 275.4 mm (W ⋅ H ⋅ D)
	(including protruding parts)

	Cabinet material*		PC+ABS resin and ABS resin
	Conditions for usage environment		Temp: 5°C to 35°C; relative humidity: 30% to 70%
	Display pixels		1 chip DMD™
	Picture elements		409,920 pixels (854H ⋅ 480V)
	Lens		Zoom lens	F=2.75-3.03 f=22.3-26.76 mm
	Lamp		High-pressure mercury lamp
	Projection screen size		24-290 inches
	Projection distance		1.20-12.00m
	terminal	COMPUTER terminal	Mini D sub 15 pin Analog RGB
		DVI-D terminal	DVI connector	Digital RGB
		Y terminal	RCA Pin Jack, 1V(p-p), 75 Ω
		PB/CB terminal	RCA Pin Jack, 0.7V(p-p), 75 Ω
	Connection
		PR/CR terminal	RCA Pin Jack, 0.7V(p-p), 75 Ω
		VIDEO terminal	RCA Pin Jack, 1 V (p-p), 75 Ω
		S-VIDEO terminal	Mini DIN 4 pin
		CONTROL terminal	Mini DIN 8 pin (RS-232C)

Note

•This model complies with the above specifications.

•Designs and specifications are subject to change without notice.

•This model may not be compatible with features and/or specifications that may be added in the future.

■Separately sold product

Replacement Lamp

Model TLPLMT20

38

Image 38

Contents TDP-MT200 Safety Precautions USA onlyBefore Using Source of Light Important Safety InstructionsPower Sources VentilationHeat Power-Cord ProtectionCleaning Water and MoistureImportant Safety Instructions Servicing AccessoriesDamage Requiring Service Do not use the product in a closed installation state Replacement PartsSafety Check Place and Manner of Installation Power Supply Cord SelectionImportant Precautions Save Original Packing MaterialsImportant Precautions Avoid Volatile Liquid Exemption ClausesRemote Control Batteries Other Cautions and InformationsContents Others Checking the package contents Names of each part on the main unit 108 11Names of each part on the control panel and remote control Parts on the rear panel Operating the remote control Preparing and using the remote controlLoading dry-cell batteries into the remote control Remove the battery cover Insert the dry-cell batteriesProjection Distance and Size PlacementPlacement Styles Screen As seen from aboveConnection Before connectionRemoving the lens cover Connecting the power cordTurning the power on Press the ON/STANDBY button Turning the power on and offTurning the power off Press the ON/STANDBY button againActivate the connected device Turn on the powerBasic operations Press the Input buttonTo adjust the horizontal angle, use the tilt adjuster Projector placement angle adjustmentsAdjusting the screen size and focus Basic operationsCorrecting the keystone distortion Using handy featuresUsing auto setting Using handy features Manual adjustments and settingsCutting off the picture temporarily Mute Press the remote control’s Mute buttonPress the remote control’s Freeze button Freezing the image FreezeUsing the menus How to use the menusImage adjustment menu Screen size Using the menuDisplay setting menu Sets the lamp power Low Standard Default setting menuNo signal AutoDisplaying Information Status display Version Firmware version NoteAbout lamp Lamp replacementWhen the lamp is broken Lamp replacement Main unit cleaning Lens and main unit cleaning Lens cleaning Replacing cooling fansTrouble indications No powerPower went out during use Lamp went out during use, or won’t come onBefore calling service personnel Specification SpecificationsList of general specifications Separately sold productList of supported signals RGB signals SVGA85Specifications List of supported signals DVI signalsPin assignment of Computer terminal List of supported signals Y/PB/PR signalsList of supported signals Video, S-Video signals Pin arrangement for the DVI-D terminal D V I D Pin assignment Main CommandsControl terminal Interface format