Programming The Remote, Programming Without a Code

REMOTE CONTROL OPERATION (MODELS PT-47WXC43AND PT-47WX33)

Programming The Remote

Component Codes

ENGLISH

The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component function buttons for VCR, DVD, CABLE or DBS. Follow the procedures for programming your Remote Control with or without a code for the component.

Device	Operates	Default
TV	TV (Panasonic Only)	Panasonic Code
DBS/CBL	DBS STB & CBL STB (Preset)	Panasonic DBS Code
VCR	VCR (Preset)	Panasonic Code
DVD	DVD (Preset)	Panasonic Code

Note: Determine the manufacturer of the component and look in the table for the code.

Procedure

•Confirm that the external component is plugged and operating.

•Turn the component off.

ACTION

• Press

and P O W E R together, for at least 5

seconds.

•Press appropriate component button on the Remote Control VCR, DVD, CABLE or DBS.

•Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons).

• Press the Remote Control

P O W E R

to test the

component. If the procedure was successful, the component will turnon.

Note: If the component does not operate with the Remote Control, repeat the procedure using another code. (Some brands have multiple codes). If an incorrect code is entered, or if the procedure takes longer than 30 seconds, the programming will fail.

Programming Without A Code

This procedure searches all codes and is called the “sequence method.”

•Confirm that the external component is plugged in and on.

•Turn the component off.

ACTION

•

Press

and P O W E R together, for at least 5

seconds.

•Press appropriate component button on the Remote Control.

•Press VOL u to move forward to the next code. Press t VOL to move backward.

•

Press the Remote Control P O W E R

to test the

component. If the procedure was successful, the component will turn on.

Note: Repeat the above steps until the component code is found. It may take many attempts before the correct code isfound.

		ACTION
•	After the code is found, press	to store the
	code.

The Universal Remote Control is capable of operating many component brands after entering a code. Some components may not operate because the codes are not available due to limited memory. The Universal Remote Control does not control all features found in each model.

Write the code numbers from tables in this space. This will serve as a reference if you need to program your Remote Control.

VCR				CABLE				DVD

DBS

12•