Sony PT-4743 Programming the Remote Programming without a Code, Programming with a Code

REMOTE CONTROL OPERATION (MODELS PT-47/53/56WX53, PT-53/56TW53 AND PT-4743)

Programming the Remote Programming without a Code

The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your Remote Control with or without a code for the component.

Default Modes for Remote Control

This procedure searches all codes and is called the “sequence method.”

Procedure

•Confirm that the external component is plugged in and on.

•Turn the component off.

ACTION

Device

TV

DTV-STB

CABLE

DBS

VCR DVD/CD

AUX

RCVR

Operates

TV (Panasonic Only)

DTV (Panasonic Only)

CABLE (Preset)

DBS (Preset)

VCR (Preset0

DVD and CD (Preset)

Personal Video Recorders,

Tape and VCR2

Audio receiver (Preset)

Default

Panasonic TV Code

Panasonic DTV Code

Panasonic CABLE

Code

Panasonic DBS Code

Panasonic VCR Codes

Panasonic DVD Codes

Panasonic Personal Video Recorder Code

Panasonic RCVR code

•Press and POWER together, for at least 5 seconds.

•Press appropriate component button on the Remote Control.

•Press VOL u to move forward to the next code. Presst VOL to move backward.

•Press the Remote Control POWER to test the

component. If the procedure was successful, the component will turn on.

Note: Repeat the above steps until the component code is found. it may take many attempts before the correct

ENGLISH

Note: Determine the manufacturer of the component and look in the table for the code.

Programming with a Code

Procedure

•Confirm that the external component is plugged in and operating.

•Turn the component off.

ACTION

•Press and POWER together, for at least 5 seconds.

•Press appropriate component button on the Remote Control VCR, DVD (CD), AUX (VCR2 or TAPE), RCVR, DTV, CABLE or DBS.

•Enter the 3-digit component code using the Remote Control numeric keypad (0 - 9 buttons).

•Press the Remote Control POWER to test the

component. If the procedure was successful, the component will turnon.

Note: If the component does not operate with the Remote Control, repeat the procedure using another code. (Some brands have multiple codes). If an incorrect code is entered, or if the procedure takes longer than 30 seconds, the programming will fail.

code is found.

Component Codes

The Universal Remote Control is capable of operating many component brands after entering a code. Some components may not operate because the codes are not available due to limited memory. The Universal Remote Control does not control all the features found in each model.

Write the code numbers from tables in this space. This will serve as a reference if you need to program your Remote Control.

	VCR		DVD		DVD (CD)
AUX (VCR2)		AUX (TAPE)		RECEIVER
	CABLE		DBS

17•