Sony PT-53WX53 DVI Digital Visual Interface input connection, Special Remote Buttons, BBE Button

Optional Equipment Connections (cont.)

DVI (Digital Visual Interface) input connection

The DVI/HDCP1 input on your PTV can accommodate copy protected digital programming. The DVI/HDCP input

OPTIONAL EQUIPMENT CONNECTIONS

Special Remote Buttons

ASPECT Button

Customer Options depending on Component Input Signal

terminal complies with the EIA-861Profiles2standard and is not intended for use with personal computers. The DVI/ HDCP input can be connected to an EIA/CEA 861 compliant consumer electronic device, such as a set top

box or DVD player equipped with a DVI output connection3. The DVI/HDCP input is designed for best performance with HDTV signals, such as 1080i or 720p picture signals. The DVI/HDCP input will also accept and display 480i and 480p

INPUT

SIGNAL

1080i

480p (16:9)

480p (4:3)

480i

DISPLAY ON SCREEN

16:9 only

Default to 16:9

Default to FULL mode. Note: Will stretch picture horizontally..

Default to JUST mode

ASPECT BUTTON

OPTIONS

No options

4:3, Full or Zoom (see

below)

4:3, Full or Zoom (see

below)

4:3, Full, Just or Zoom (see below)

ENGLISH

picture signals.

Notes:

1.DVI/HDCP = Digital Visual Interface / High-Bandwith Digital Copy Protection.

2.EIA/CEA-861 Profiles compliance covers profiles for transmission of uncompressed digital video including high bandwidth digital content protection.

3.Consult your consumer electronics dealer for availability details.

Follow the diagram below to connect the PTV to a set top box or a DVD player.

Procedure

•Press TV/VIDEO button on the remote control to select DIGITAL-IN input.

•Connect the DVI output from the set top box or a DVD player to the DIGITAL IN input on the back of the PTV.

•Connect the Audio Out signal from the set top box or DVD player to the L and R Audio inputs associated with the DIGITAL IN input.

The ASPECT button on the remote control lets you choose one of four display modes, depending on the formats of the received signal and your preferences..

This will display a 4:3 picture at its standard 4:3 size with

gray side bars. (Not recommended for viewing 4:3 pictures as it may create a permanent image on screen if displayed for a prolonged period of time.)

This will expand the 4:3 picture uniformly (width and height) to full screen width and then reposition the picture vertically. (Recommended for letterbox pictures.)

Note: If menu is displayed while in Zoom mode, the aspect will change to Full to display complete menu.

This will show picture at full screen size. (Recommended for anamorphic pictures.)

This will stretch the right and left edges of a 4:3 picture to fill the screen, The center of the screen will have aspect correction appliled. The size of the picture will depend on the original signal. (Recommended for regular TV viewing.)

BBE Button

Press this button to turn BBE VIVA 3D (available on PT-53TW53 and PT-56TW53 only) or BBE sound feature On or Off.

SAP Button

Press this button to let you cycle through different audio modes. If you are receiving a stereo program and you press this button, you can cycle between STEREO and MONO.

7•