Network settings
Setting the connection speed
When the connection test results in “Fail” after the IP and
After performing steps
4Press [3, 4] to select “Auto Detect Connection Speed” and press
[2, 1] to select “Off”.
5Press [3, 4] to select “Connection Speed Setting” and press [2, 1] to select a connection speed.
≥Select a connection speed in accordance with the environment of the network connected.
≥When the settings are changed, the network connection may be disabled depending on the device.
Testing of “Proxy Server Settings”
Always test the connection when new “Proxy Server Settings” have been made.
1Press [SETUP].
2Press [3, 4] to select “Network” and press [OK].
3Press [3, 4] to select “Proxy
Server Settings” and press [OK].
4Press [3, 4] to select “Connection Test” and press [OK].
“Testing”: | The test is in progress. |
“Pass”: | The connection is completed. |
| Press [RETURN] to exit. |
“Fail”: | Please check the connection and settings. |
Setting the proxy server
In most cases, default settings can normally be used without making any changes.
Please use this setting when instructed to by your Internet service provider.
After performing steps
4Press [3, 4] to select “Proxy Address” and press [OK].
Proxy Server Settings
Reset to factory preset |
|
Proxy Address |
|
Proxy Port Number | 0 |
Connection Test |
OK
RETURN
18
5Press [3, 4, 2, 1] to select a
character and press [OK].
Text field: shows the text you have entered
Proxy Address |
|
|
|
|
|
|
|
|
|
| ||
_ |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 |
|
| 2 | A | B | C |
| a | b | c | + | - | * |
|
| 3 | D | E | F |
| d | e | f | / | = | % |
|
| 4 | G | H | I |
| g | h | i | # | $ | & |
Delete |
| 5 | J | K | L |
| j | k | l | < | > | @ |
Finish |
| 6 | M | N | O |
| m | n | o | [ | ] | _ |
|
| 7 | P Q R S p q r s ( ) | |||||||||
|
| 8 | T | U | V |
| t | u | v | { | } | ~ |
|
| 9 | W X Y Z w x y z \ | I | ||||||||
|
| 0 | . | , | ? ! “ | ’ | : | ; | ` | ^ | ||
OK |
|
|
|
|
|
| Space |
|
|
|
| |
RETURN | 0 |
|
|
|
|
|
|
|
|
|
| |
Using the numbered buttons to enter characters
e.g., entering the letter “F”
1
1 
2 
3 
4 2
A 
B 
C 
3
D 
E 
F 
4 
G 
H 
I 
1)Press [3] to move to the 3rd row.
2)Press [3] twice to highlight “F”.
3)Press [OK].
Repeat this step to enter other characters. ≥Press [;] to delete.
6Press [∫] when you complete the entry.
7Press [3, 4] to select “Proxy Port Number” and press [OK].
8Enter numbers with the numbered buttons and press [OK].
Proxy Port Number
Please input Proxy Server Port Number and press [OK]. Press [CANCEL] to delete the selected character. The number will be set to "0" if all characters are deleted and [OK] is pressed.
0
0 - 9 Number
9Press [2, 1] to select “Yes” and press [OK].
≥The specified ports may be blocked and not be able to be used depending on the network environment.
In order to restore the default settings
After performing steps 1–3
1)Press [3, 4] to select “Reset to factory preset” and press [OK].
2)Press [2, 1] to select “Yes” and press [OK].
RQT9412