Panasonic DMP-BD70V operating instructions Usb, Card

Page 42

Troubleshooting guide

Card

Page

The capacity of the SD card decreased.

Music on an SD card cannot be played.

The contents of the card cannot be read.

≥When a BD-Video that supports BD-Live is used, and an SD card is in the slot, data may be written to the SD card.

≥Data that can be played from an SD card are AVCHD, MPEG2 and JPEG data.

≥The card is not compatible or the contents on the card may be damaged. ≥Turn off and then turn on the unit again.

23

7

7

—

USB

The contents of the USB device cannot be read.

USB device cannot be operated.

≥Remove the USB device from the USB port and then insert again. If this does not solve the problem, turn off and turn on the unit again.

≥Check that the USB device is inserted correctly.

≥The format of the USB device or its contents are not compatible with the unit. (The contents on the USB device may be damaged.)

≥The USB device contains a folder structure and/or file extensions that are not compatible with this unit.

≥Turn off and then turn on the unit again.

≥USB devices connected using a USB extension cable or a USB hub may not be recognized by this unit.

≥Some USB devices cannot be used with this unit.

≥If inserted during playback the USB device may not be recognized by this unit.

≥Turn the power of this unit off once, and turn it back on.

—

19

7

37

—

—

7

—

7

VHS

On-screen display indicators for video cassette playback do not appear.

Cannot play.

The playback screen flickers.

There is noise when playing a video tape.

≥Select “Automatic“ in “Status Messages“ in the Setup menu.

–Press [STATUS] to show the on-screen display indicators for video cassette playback.

≥Tapes recorded under a TV system other than NTSC (PAL, SECAM, etc.) cannot be played.

≥Beginning and end of 3orUcassettes may not playback.

≥The video head is dirty.

≥The tape is old or damaged.

≥Adjust the tracking.

≥The video head is dirty.

≥The tape is old or damaged.

≥There may be some noise on the screen for cassettes that were recorded in other than normal mode.

≥You may see a noise around the image when the TV is connected using a HDMI cable. Adjust the screen size on the TV.

If you cannot adjust the screen size on the TV, the noise will disappear by setting the “HDMI Resolution” in the Setup menu to “480p”. However, please restore the setting to the original when playing back in high definition images other than VHS.

33

—

—

3

—

26

3

—

—

34

Network

I can’t connect to the network.

VIERA CAST does not operate or connect.

≥Have you subscribed to high speed internet connection? Check that the LAN cable is properly connected.

≥Have you plugged a telephone cord into the LAN terminal on this unit? Connect with a straight LAN cable.

≥Confirm the power for the modem or broadband router is turned on.

≥Confirm the network settings. Follow any instructions you may have received from your ISP (Internet Service Provider) and make changes to the settings.

≥Are the broadband router settings correct? Read the operating instructions for the broadband router.

≥Is the broadband router and/or modem connected correctly? Check the operating instructions for each device and connect accordingly.

≥Check the “Network” and “BD-Live Internet Access” settings.

≥Is the network connection correct?

≥Image of the video contents may be incomplete or may not display depending on how busy the environment or the connected line is.

16

16

—

—

—

—

32, 35

16

—

42

RQT9412

Page 41 Page 43
Image 42
Page 41 Page 43
Contents If you have any questions contact CanadaThe warranty can be found onRegion management information Canada1-800-561-5505FCC Note Following Applies only in the U.S.AMedia handling MaintenanceUnit and media care To dispose or transfer this unitTable of contents Remote control Audio/Video Batteries AC power supply cord Accessory27informationUsing the remote control CableMedia Disc/Card/USB device/Video cassette information Commercially sold discsUser recorded media SD Memory Card* from 8 MB to 2 GB SD cardsDiscs that cannot be played in this unit Sdhc Memory Card from 4 GB to 32 GBAudio and video information About audio from audio output terminalsEnjoying High Bit rate Audio of BD-Video BD-V Regarding 24p output BD-V Necessary settings for audio outputAudio output setting for the various equipment To return to the previous screenVideo Connections TV Highest ConnectionsAbout terminal QualityConnecting to your TV, via Video OUT Connecting to your TV, via Hdmi AV OUTConnecting to your TV, via Component Video OUT Video Connections TVConnecting to Hdmi AV OUT terminal Digital Audio ConnectionsHdmi OUT AC power connection Analog Audio ConnectionAudio Remote control and unit reference guide Power button Power Í/IPress Í Power SettingEasy Setting Reprogramming the remote control for TV controlAutomatically check the firmware Firmware updatesBroadband network connection Manually updating the firmwareSetting the IP address Network settingsTesting of IP Address/DNS Settings Setting the DNS-IPSetting the proxy server Setting the connection speedTesting of Proxy Server Settings Press 3, 4 to select Proxy Address and press OKInserting or removing an SD card Inserting or removing mediaInserting or removing a disc Inserting or removing a USB deviceBasic play Playing video contents Showing Functions menu Press FunctionsPress 3, 4 to select the item Press OK Press 3, 4, 2, 1 to select the title and press OK Chapter playback DVD-VRInsert a disc or SD card Insert a discEnjoying BD-Live discs with Internet Enjoying BD-Live or Bonusview in BD-Video BD-VPress PIP Insert an SD cardPress 3, 4, 2, 1 to select the album and press OK Playing still pictures JpegInsert a disc, SD card or USB device Press 3, 4, 2, 1 to select the still picture and press OKPress SUB Menu Press 3, 4 to select Zoom out Press OK Press 3, 4 to select Slideshow Settings and press OKPress 3, 4, 2, 1 to select Set and press OK Press Status twicePlaying a video cassette VHS Other operations of Video cassettePress 3, 4 to select the track Press OK Playing music CD MP3Insert a disc or USB device Playing a track in another folder MP3What is Viera Link Hdavi Control? Linked operations with the TV Viera LinkTM Hdavi ControlTMPreparation Select the player Easy control only with Viera remote controlPress the button for Viera Link on the remote control Press SUB MenuChanging settings with the on-screen menu except VHS On-screen menu operationsWhat you can change with the on-screen menu Audio PlayVideo BD-V Avchd DVD-VR DVD-V MPEG2Summary of settings Changing the unit’s settingsSetup menu operations Press 3, 4, 2, 1 to select the option and press OKAudio DisplayTo select these options, perform steps 1-4 TV / Device Connection Network Press 3, 4 to select the code 1, 2, or 3 To change the code on the remote controlCode and press OK OthersAbout MP3/JPEG files Structure of folders that can be played in this unitMP3 Please confirm Setup MessagesOn the television On the unit’s display Power Troubleshooting guideTo reset this unit Following do not indicate a problem with this unitDisplays TV screen and videoSound USB CardOther difficulties with playback ≥This occurs between playlist chapters or scenes AvchdSpecifications Product Service User memoCarry-In or Mail-In Service Limited Warranty Only for U.S.A. and Puerto RicoCentralized Factory Service Center Limited Warranty Limits And ExclusionsIf YOU Ship the Product to a Servicentre Limited Warranty Only for CanadaWarranty Service Panasonic Canada IncLicenses Conexiones básicas Reproducción básicaGlossary BD-JDTS-HD Viera Cast Quick Start R Ratings level Re-master Remote control AC Power Connection Angle AudioOff Timer On-screen Connections
Top Page Image Contents