Panasonic DMP-BD70V Audio, Display, To select these options, perform steps 1-4

Page 33

To select these options, perform steps 1–4 (> 32)

“Audio”

Dynamic Range Compression [BD-V] [AVCHD] [DVD-V]

≥On

Off

(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)

≥Auto:

Effective only when Dolby TrueHD is played.

Change the dynamic range (> 50) for late night viewing.

 

 

Digital Audio Output (> 8)

 

 

≥Press [OK] to show the following settings.

 

 

Dolby D/Dolby D +/ Dolby TrueHD

DTS/DTS-HD

Select whether Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS Digital Surround, DTS-HD High Resolution Audio or DTS-HD Master Audio is output in “Bitstream” or “PCM” format.

≥Not making the proper settings may result in noise.

≥If the unit is connected with the HDMI AV OUT terminal, the specifications of the connected equipment take preference over this

Bitstream:

Select “Bitstream” when the connected equipment can decode the respective audio format.

Connect equipment supporting HDMI (High Bit rate Audio) and use a High Speed HDMI Cable in order to output high bit rate audio such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio or

DTS-HD Master Audio. ≥PCM:

Select “PCM” when the connected equipment cannot decode the respective audio format.

 

unit and audio selected in these

Refer to the operating instructions for connected devices to verify whether or

 

items may not be output (e.g., when

not they can decode each of the audio formats.

 

a television is connected, the HDMI

 

 

 

audio output of this unit is limited to

 

 

 

down-mixed 2ch.)

 

 

 

BD-Video Secondary Audio [BD-V]

On:

The primary audio and secondary audio are mixed and output. The

 

Turn on/off the button click sound on the menu and audio with

 

sampling frequency is converted to 48 kHz.

 

secondary video in picture-in-picture mode. (> 23)

≥Off:

The button click sound on the menu and secondary audio are not

 

 

 

output.

PCM Down Conversion

≥On:

Signals are converted to 48 kHz. (Choose when the connected

Select how to output audio with a sampling frequency of 96 kHz.

 

equipment cannot process signals with sampling frequency of

≥Signals are converted to 48 kHz despite the settings across in

 

96 kHz.)

 

the following cases:

Off:

Signals are output as 96 kHz. (Choose when the connected

 

– when the signals have a sampling frequency of 192 kHz

 

equipment can process signals with sampling frequency of

 

– when the disc has copy protection

 

96 kHz.)

 

– when “BD-Video Secondary Audio” is set to “On”

 

 

Downmix

Stereo:

When connected to equipment (e.g., TV) that does

Switch the downmix system for playing back multi-channel

 

not support the virtual surround function.

surround sound.

≥Surround encoded: When connected to equipment that supports the

≥When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is

 

conversion from 2 channels to multi channel

 

set to “Bitstream”, there are no downmix effects for the outputted

 

surround.

 

 

 

 

audio.

 

 

≥The audio will be outputted in “Stereo” in the following cases:

 

 

 

– AVCHD playback

 

 

 

– Playback of button click sound on the menu and audio with

 

 

 

secondary video in picture-in-picture mode

 

 

“Display”

Status Messages

Automatic

≥Off

 

Choose whether to show status messages automatically.

 

 

 

On-screen Language

English

≥Français

≥Español

Choose the language for these menus and on-screen messages.

 

 

 

Screen Saver Function

≥On: (Screen Saver Function is enabled after 10 minutes of no activity)

This is to prevent burn-in on the screen.

– When the movie title being played was created in 4:3 display mode the

≥Regardless of the setting, the screen switches to Screen Saver

masked-off area on the screen becomes gray to prevent screen burning.

mode if there is no operation for 2 minutes after starting the

(The screen saver will not be activated if the movie was created in 16:9

display mode.)

 

playback of CD or MP3. (Playback continues.).

 

[When connecting with an HDMI cable, “TV Aspect” (> 34) is set to “16:9”

 

 

and “HDMI Resolution” (> 34) is set to any mode other than “480p”, or

 

when connecting with a component video cable, “TV Aspect” (> 34) is set

 

to “16:9” and “Component Video Resolution” (> 34) is set to “720p” or

 

“1080i”.]

 

 

 

– When the Direct Navigator or FUNCTIONS menu is displayed, the

 

display returns to the screen saver mode.

 

– When still pictures are shown (except for slideshow), the display returns

 

to the Direct Navigator screen.

 

Off

 

 

FL Display

Bright

 

 

Changes the brightness of the unit’s display.

≥Dim:

The display is dimmed.

 

≥Auto:

The display is dimmed during playback and is bright

 

 

except during playback.

SD Card LED Control

On

≥Off

 

Set the lighting method for the lamp on the SD card slot.

≥SD inserted:

When this unit is turned on and SD card is inserted, the

 

 

lamp is lighted.

License

Information about the software used by this unit is displayed.

Settings

33

RQT9412

Image 33
Contents Region management information CanadaThe warranty can be found onIf you have any questions contact Canada1-800-561-5505Following Applies only in the U.S.A FCC NoteUnit and media care MaintenanceMedia handling To dispose or transfer this unitTable of contents Using the remote control Accessory27informationRemote control Audio/Video Batteries AC power supply cord CableMedia Disc/Card/USB device/Video cassette information Commercially sold discsUser recorded media Discs that cannot be played in this unit SD cardsSD Memory Card* from 8 MB to 2 GB Sdhc Memory Card from 4 GB to 32 GBAudio and video information About audio from audio output terminalsEnjoying High Bit rate Audio of BD-Video BD-V Audio output setting for the various equipment Necessary settings for audio outputRegarding 24p output BD-V To return to the previous screenAbout terminal ConnectionsVideo Connections TV Highest QualityConnecting to your TV, via Component Video OUT Connecting to your TV, via Hdmi AV OUTConnecting to your TV, via Video OUT Video Connections TVConnecting to Hdmi AV OUT terminal Digital Audio ConnectionsHdmi OUT AC power connection Analog Audio ConnectionAudio Power button Power Í/I Remote control and unit reference guideEasy Setting SettingPress Í Power Reprogramming the remote control for TV controlBroadband network connection Firmware updatesAutomatically check the firmware Manually updating the firmwareTesting of IP Address/DNS Settings Network settingsSetting the IP address Setting the DNS-IPTesting of Proxy Server Settings Setting the connection speedSetting the proxy server Press 3, 4 to select Proxy Address and press OKInserting or removing a disc Inserting or removing mediaInserting or removing an SD card Inserting or removing a USB deviceBasic play Playing video contents Showing Functions menu Press FunctionsPress 3, 4 to select the item Press OK Insert a disc or SD card Chapter playback DVD-VRPress 3, 4, 2, 1 to select the title and press OK Insert a discPress PIP Enjoying BD-Live or Bonusview in BD-Video BD-VEnjoying BD-Live discs with Internet Insert an SD cardInsert a disc, SD card or USB device Playing still pictures JpegPress 3, 4, 2, 1 to select the album and press OK Press 3, 4, 2, 1 to select the still picture and press OKPress 3, 4, 2, 1 to select Set and press OK Press 3, 4 to select Slideshow Settings and press OKPress SUB Menu Press 3, 4 to select Zoom out Press OK Press Status twiceOther operations of Video cassette Playing a video cassette VHSInsert a disc or USB device Playing music CD MP3Press 3, 4 to select the track Press OK Playing a track in another folder MP3What is Viera Link Hdavi Control? Linked operations with the TV Viera LinkTM Hdavi ControlTMPreparation Press the button for Viera Link on the remote control Easy control only with Viera remote controlSelect the player Press SUB MenuChanging settings with the on-screen menu except VHS On-screen menu operationsWhat you can change with the on-screen menu Video PlayAudio BD-V Avchd DVD-VR DVD-V MPEG2Setup menu operations Changing the unit’s settingsSummary of settings Press 3, 4, 2, 1 to select the option and press OKAudio DisplayTo select these options, perform steps 1-4 TV / Device Connection Network Code and press OK To change the code on the remote controlPress 3, 4 to select the code 1, 2, or 3 OthersAbout MP3/JPEG files Structure of folders that can be played in this unitMP3 Please confirm Setup MessagesOn the television On the unit’s display To reset this unit Troubleshooting guidePower Following do not indicate a problem with this unitDisplays TV screen and videoSound Card USB≥This occurs between playlist chapters or scenes Avchd Other difficulties with playbackSpecifications User memo Product ServiceCentralized Factory Service Center Limited Warranty Only for U.S.A. and Puerto RicoCarry-In or Mail-In Service Limited Warranty Limits And ExclusionsWarranty Service Limited Warranty Only for CanadaIf YOU Ship the Product to a Servicentre Panasonic Canada IncLicenses Reproducción básica Conexiones básicasGlossary BD-JDTS-HD Viera Cast Off Timer On-screen AC Power Connection Angle AudioQuick Start R Ratings level Re-master Remote control Connections