Panasonic DMP-BD70V Regarding 24p output BD-V, Necessary settings for audio output

Page 9

Regarding 24p output [BD-V]

Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in 60 frames/second in accordance with the display format.

These can be output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.

NECESSARY CONNECTIONS

≥Connect to a TV supporting 1080/24p input via an HDMI cable.

NECESSARY SETTINGS

≥“24p Output”: “On” (> 34)

Getting started

Necessary settings for audio output

After connecting to the terminals, perform necessary settings.

“BD-Video

1) While stopped

Secondary Audio”

Press [SETUP].

2) Press [3, 4] to select “Audio” and press [OK].

“Dolby D/Dolby D +/

3)

Press [3, 4] to select “Digital Audio Output” and press [OK].

Dolby TrueHD”

4)

Press [3, 4] to select “Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD”,

“DTS/DTS-HD”

 

or “BD-Video Secondary Audio” and press [2, 1] to select the option.

Audio

Dynamic Range Compression

 

Off

Digital Audio Output

 

PCM Down Conversion

 

 

 

Off

Downmix

 

 

 

Stereo

OK

RETURN

≥For more information about settings, refer to page 33, 34.

≥When using the different terminal at the same time, the sound may not be output with the desired audio if the setting is incorrect. In the following case, set “HDMI Audio Output” to “Off”. (> 34)

When connecting a compatible amplifier/receiver using DIGITAL AUDIO OUT terminals, and connecting a compatible television using HDMI AV OUT terminal

To return to the previous screen

Press [RETURN].

To exit the screen

Press [SETUP].

Audio output setting for the various equipment

Below is a table of recommended settings to output high quality audio to the connected equipment. When connecting to equipment not listed below, change to your preferred settings as necessary.

 

 

 

 

Example of connected equipment

 

 

 

 

 

Receiver via HDMI

 

 

 

 

TV via HDMI

Receiver has HD

Receiver doesn’t have

Receiver via OPTICAL

 

 

 

 

audio*1 decoder &

HD audio*1 decoder &

 

 

 

 

 

5.1ch speakers

5.1ch speakers

 

 

 

“Dolby D/Dolby D

“PCM”

“Bitstream”

“PCM”

“PCM”

 

 

+/Dolby TrueHD”

 

“Digital Audio

 

 

 

 

 

“DTS/DTS-HD”

“PCM”

“Bitstream”

“PCM”

“PCM”

“Audio”

Output”

“BD-Video

“Off”

“Off”

“Off”

“Off”

 

(B 33)

 

 

Secondary Audio”

 

 

 

 

 

 

 

“PCM Down Conversion”

*2

 

“Downmix”

“Stereo”

“Surround encoded”

“Surround encoded”

“Surround encoded”

 

 

 

 

 

 

 

*1 HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio

*2 “PCM Down Conversion” is in effect only when connected to an OPTICAL terminal. If the receiver supports 96 kHz sampling frequency, set to “Off”; if it does not support it, set to “On”.

9

RQT9412

Image 9
Contents Region management information CanadaThe warranty can be found onIf you have any questions contact Canada1-800-561-5505Following Applies only in the U.S.A FCC NoteUnit and media care MaintenanceMedia handling To dispose or transfer this unitTable of contents Using the remote control Accessory27informationRemote control Audio/Video Batteries AC power supply cord CableMedia Disc/Card/USB device/Video cassette information Commercially sold discsUser recorded media Discs that cannot be played in this unit SD cardsSD Memory Card* from 8 MB to 2 GB Sdhc Memory Card from 4 GB to 32 GBAudio and video information About audio from audio output terminalsEnjoying High Bit rate Audio of BD-Video BD-V Audio output setting for the various equipment Necessary settings for audio outputRegarding 24p output BD-V To return to the previous screenAbout terminal ConnectionsVideo Connections TV Highest QualityConnecting to your TV, via Component Video OUT Connecting to your TV, via Hdmi AV OUTConnecting to your TV, via Video OUT Video Connections TVConnecting to Hdmi AV OUT terminal Digital Audio ConnectionsHdmi OUT AC power connection Analog Audio ConnectionAudio Power button Power Í/I Remote control and unit reference guideEasy Setting SettingPress Í Power Reprogramming the remote control for TV controlBroadband network connection Firmware updatesAutomatically check the firmware Manually updating the firmwareTesting of IP Address/DNS Settings Network settingsSetting the IP address Setting the DNS-IPTesting of Proxy Server Settings Setting the connection speedSetting the proxy server Press 3, 4 to select Proxy Address and press OKInserting or removing a disc Inserting or removing mediaInserting or removing an SD card Inserting or removing a USB deviceBasic play Playing video contents Showing Functions menu Press FunctionsPress 3, 4 to select the item Press OK Insert a disc or SD card Chapter playback DVD-VRPress 3, 4, 2, 1 to select the title and press OK Insert a discPress PIP Enjoying BD-Live or Bonusview in BD-Video BD-VEnjoying BD-Live discs with Internet Insert an SD cardInsert a disc, SD card or USB device Playing still pictures JpegPress 3, 4, 2, 1 to select the album and press OK Press 3, 4, 2, 1 to select the still picture and press OKPress 3, 4, 2, 1 to select Set and press OK Press 3, 4 to select Slideshow Settings and press OKPress SUB Menu Press 3, 4 to select Zoom out Press OK Press Status twiceOther operations of Video cassette Playing a video cassette VHSInsert a disc or USB device Playing music CD MP3Press 3, 4 to select the track Press OK Playing a track in another folder MP3What is Viera Link Hdavi Control? Linked operations with the TV Viera LinkTM Hdavi ControlTMPreparation Press the button for Viera Link on the remote control Easy control only with Viera remote controlSelect the player Press SUB MenuChanging settings with the on-screen menu except VHS On-screen menu operationsWhat you can change with the on-screen menu Video PlayAudio BD-V Avchd DVD-VR DVD-V MPEG2Setup menu operations Changing the unit’s settingsSummary of settings Press 3, 4, 2, 1 to select the option and press OKAudio DisplayTo select these options, perform steps 1-4 TV / Device Connection Network Code and press OK To change the code on the remote controlPress 3, 4 to select the code 1, 2, or 3 OthersAbout MP3/JPEG files Structure of folders that can be played in this unitMP3 Please confirm Setup MessagesOn the television On the unit’s display To reset this unit Troubleshooting guidePower Following do not indicate a problem with this unitDisplays TV screen and videoSound Card USB≥This occurs between playlist chapters or scenes Avchd Other difficulties with playbackSpecifications User memo Product ServiceCentralized Factory Service Center Limited Warranty Only for U.S.A. and Puerto RicoCarry-In or Mail-In Service Limited Warranty Limits And ExclusionsWarranty Service Limited Warranty Only for CanadaIf YOU Ship the Product to a Servicentre Panasonic Canada IncLicenses Reproducción básica Conexiones básicasGlossary BD-JDTS-HD Viera Cast Off Timer On-screen AC Power Connection Angle AudioQuick Start R Ratings level Re-master Remote control Connections