Panasonic Complete Guide for DMP-BD70V Users
Page 39

On the unit’s display

 

 

 

Page

 

 

 

 

 

F99

≥The unit fails to operate properly. Press [POWER Í/I] on the main unit to switch

—

 

 

the unit to standby for 3 seconds. Now press [POWER Í/I] on the main unit

 

 

 

again to turn the unit on.

 

HDMI ONLY

≥Some BD-Video discs can only be output with HDMI.

—

NET

≥Displays while VIERA CAST is starting up.

—

No PLAY

≥There is a viewing restriction on a BD-Video or DVD-Video.

32

No READ

≥The media is dirty or badly scratched. The unit cannot play.

—

PLEASE WAIT

≥The unit is carrying out internal process. This is not a malfunction. You cannot

—

 

 

operate the unit while “PLEASE WAIT” is displayed.

 

 

≥When connected to TV(VIERA) with “HDAVI Control 4”, and power supply is

—

 

 

turned off by the “Auto power stand-by” function on the TV side.

 

REMOVE

≥The USB device is drawing too much power. Remove the USB device.

19

SET 

≥The remote control and main unit are using different codes. Change the code on

36

(“ ” stands for a number.)

 

the remote control.

 

 

 

 

Press and hold [OK] and the indicated number button at the

 

 

 

 

 

 

 

 

 

 

 

 

same time for more than 5 seconds.

 

 

 

 

 

UNFORMAT

≥You inserted an unformatted DVD-RAM, DVD-RW, +RW, an unused +R, +R DL

—

 

 

or DVD-RW (DVD-Video format).

 

UNSUPPORT

≥You have inserted a media the unit cannot play.

6, 7

 

≥You tried to operate with a non-compatible USB device.

7

U11

≥The video head is dirty. Perform the cleaning.

—

U59

≥The unit is hot.

—

 

 

The unit switches to standby for safety reasons. Wait for about 30 minutes until

 

 

 

the message disappears.

 

 

 

Select a position with good ventilation when installing the unit. Do not block the

 

 

 

cooling fan on the rear of the unit.

 

U72

≥The HDMI connection acts unusually.

—

U73

 

–The connected equipment is not HDMI compatible.

 

 

 

–Please use HDMI cables that have the HDMI logo (as shown on the cover).

 

 

 

–The HDMI cable is damaged.

 

Hor F

≥There is something unusual. (The service number displayed after H and F

—

 

 

depends on the unit’s condition.)

 

 

≥Check the unit using the troubleshooting guide. If the service number does not

40–43

 

 

disappear, do the following.

 

 

 

1 Disconnect the plug from the AC outlet, wait a few seconds, then reconnect it.

 

 

 

2 Press [POWER Í/I] to turn the power on. (The unit may be fixed.)

 

 

 

If the service number does not disappear despite doing the above, request

 

 

 

service from the dealer. Inform the dealer of the service number when requesting

 

 

 

service.

 

START

≥The system is being restarted during the firmware update. Please do not turn off

16

 

 

power.

 

UPD/

≥The firmware is being updated.

16

FINISH

≥The firmware update is complete.

16

 

 

 

 

 

Reference

39

RQT9412

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Canada1-800-561-5505 CanadaThe warranty can be found onRegion management information If you have any questions contactFollowing Applies only in the U.S.A FCC NoteTo dispose or transfer this unit MaintenanceUnit and media care Media handlingTable of contents Cable Accessory27informationUsing the remote control Remote control Audio/Video Batteries AC power supply cordMedia Disc/Card/USB device/Video cassette information Commercially sold discsUser recorded media Sdhc Memory Card from 4 GB to 32 GB SD cardsDiscs that cannot be played in this unit SD Memory Card* from 8 MB to 2 GBAudio and video information About audio from audio output terminalsEnjoying High Bit rate Audio of BD-Video BD-V To return to the previous screen Necessary settings for audio outputAudio output setting for the various equipment Regarding 24p output BD-VQuality ConnectionsAbout terminal Video Connections TV HighestVideo Connections TV Connecting to your TV, via Hdmi AV OUTConnecting to your TV, via Component Video OUT Connecting to your TV, via Video OUTConnecting to Hdmi AV OUT terminal Digital Audio ConnectionsHdmi OUT AC power connection Analog Audio ConnectionAudio Power button Power Í/I Remote control and unit reference guideReprogramming the remote control for TV control SettingEasy Setting Press Í PowerManually updating the firmware Firmware updatesBroadband network connection Automatically check the firmwareSetting the DNS-IP Network settingsTesting of IP Address/DNS Settings Setting the IP addressPress 3, 4 to select Proxy Address and press OK Setting the connection speedTesting of Proxy Server Settings Setting the proxy serverInserting or removing a USB device Inserting or removing mediaInserting or removing a disc Inserting or removing an SD cardBasic play Playing video contents Showing Functions menu Press FunctionsPress 3, 4 to select the item Press OK Insert a disc Chapter playback DVD-VRInsert a disc or SD card Press 3, 4, 2, 1 to select the title and press OKInsert an SD card Enjoying BD-Live or Bonusview in BD-Video BD-VPress PIP Enjoying BD-Live discs with InternetPress 3, 4, 2, 1 to select the still picture and press OK Playing still pictures JpegInsert a disc, SD card or USB device Press 3, 4, 2, 1 to select the album and press OKPress Status twice Press 3, 4 to select Slideshow Settings and press OKPress 3, 4, 2, 1 to select Set and press OK Press SUB Menu Press 3, 4 to select Zoom out Press OKOther operations of Video cassette Playing a video cassette VHSPlaying a track in another folder MP3 Playing music CD MP3Insert a disc or USB device Press 3, 4 to select the track Press OKWhat is Viera Link Hdavi Control? Linked operations with the TV Viera LinkTM Hdavi ControlTMPreparation Press SUB Menu Easy control only with Viera remote controlPress the button for Viera Link on the remote control Select the playerChanging settings with the on-screen menu except VHS On-screen menu operationsWhat you can change with the on-screen menu BD-V Avchd DVD-VR DVD-V MPEG2 PlayVideo AudioPress 3, 4, 2, 1 to select the option and press OK Changing the unit’s settingsSetup menu operations Summary of settingsAudio DisplayTo select these options, perform steps 1-4 TV / Device Connection Network Others To change the code on the remote controlCode and press OK Press 3, 4 to select the code 1, 2, or 3About MP3/JPEG files Structure of folders that can be played in this unitMP3 Please confirm Setup MessagesOn the television On the unit’s display Following do not indicate a problem with this unit Troubleshooting guideTo reset this unit PowerDisplays TV screen and videoSound Card USB≥This occurs between playlist chapters or scenes Avchd Other difficulties with playbackSpecifications User memo Product ServiceLimited Warranty Limits And Exclusions Limited Warranty Only for U.S.A. and Puerto RicoCentralized Factory Service Center Carry-In or Mail-In ServicePanasonic Canada Inc Limited Warranty Only for CanadaWarranty Service If YOU Ship the Product to a ServicentreLicenses Reproducción básica Conexiones básicasGlossary BD-JDTS-HD Viera Cast Connections AC Power Connection Angle AudioOff Timer On-screen Quick Start R Ratings level Re-master Remote control
Top Page Image Contents