Lexicon BD-30 manual Disc Playback, Pause and Frame-by-Frame

Basic Operations Lexicon

Disc Playback

	1.	Press the POWER button to
POWER	OPEN	turn on the player.
	2.	Press the OPEN/CLOSE
		(OPEN) button to eject the
		disc tray.
	3.	Place the disc with the
		label side facing up and the
		recorded side facing down.

•Certain Blu-ray Discs with BD-Java technology do not support the pre-stop mode. Pressing the STOP button during playback of such discs will completely stop the disc. Pressing the PLAY button once the disc is stopped will restart it from the very beginning.

•This unit consumes a tiny amount of power even when it is turned off to STANDBY mode. If it is not to be used for a long time, unplug it from the household AC outlet.

Pause and Frame-by-Frame

4. Press the OPEN/CLOSE

PLAY PAUSE

REVFWD

1.During playback, press the PAUSE button to temporarily pause the program. In this mode, a PAUSE icon will appear on the TV screen.

		(OPEN) button again to
STOP	PLAY	retract the tray.

5.The player will read the disc information and starts playback.

6.Depending on the content of the disc, a menu or navigation screen may appear. Please use the navigation ARROW and SELECT buttons to select the content to play.

7.To stop playback, press the STOP button.

8.To turn off the player, press the POWER button.

Note

•During DVD and some Blu-ray Disc playback, pressing the STOP button for the first time brings the player to a pre-stop mode. You can resume playback from the stopped point by pressing the PLAY button. This pre-stop mode allows you to change the player settings and then resume playback. To completely stop playback, press the STOP button twice.

2.While a DVD or Blu-ray Disc is paused, press the REV or FWD button to reverse or advance the video frame-by-frame.

3.Press the PLAY button to resume normal playback.

Note

If the screen saver is set to “On” or “Energy Saver” (please refer to page 57 for details), after pausing for 3 minutes the player will activate the screen saver.

28