Lexicon BD-30 manual Advanced Operations, Zoom Levels for Component Video Output

Advanced Operations			Lexicon
1:1	“Stretch” Zoom	Original 4:3
		Non-anamorphic
		Widescreen Movie	“Stretch” Zoom

“Full Screen” Zoom

“Full Screen” Zoom

6)Playing 4:3 BD or DVD when “TV Aspect Ratio” is set to “4:3 Pan/Scan” or “4:3 Letterbox”

•Stretch – The image is vertically stretched by 1.33 times. For widescreen movies published in 4:3 non-anamorphic format, this zoom level cuts off the black borders at the top and bottom of the image. Figures may look taller and narrower than they should be.

•Full Screen - The image is stretched by 1.33 times for both vertical and horizontal directions. For widescreen movies published in 4:3 non-anamorphic format, this zoom level cuts off the black borders at the top and bottom of the image while maintaining the correct aspect ratio. The left and right sides of the image are slightly cropped.

The “Under Scan” zoom level shrinks the image by 5%. This zoom level may be used to compensate for TVs that over scan, so the viewer can see the entire image area with no cropping. All other zoom levels are indicated by their respective zoom ratio.

Zoom Levels for Component Video Output

The following zoom levels are available when “Primary Output” is set to “Component”:

1.0(No zooming) → 2X → 3X

→4X → ½ → ¹⁄³ → ¼ → Back to 1.0 again

Note

•The ZOOM feature may not be available when certain DVD or Blu-ray Discs are played because the disc author chooses to disable ZOOM.

38