Lexicon BD-30 manual Video Setup, Ntsc

BD-30 Blu-ray Disc Player Setup Menu Options

password. Enter the new password again to confirm. If the two entries are matching, the new password replaces the old parental control password.

3.Angle Mark (on/off): To turn on/off the display of an angle mark when a DVD or Blu-ray Disc with multiple available angles is played. Keeping the angle mark off avoids distraction from normal movie watching.

4.PIP Mark (on/off): To turn on/off the display of a Picture- in-Picture mark when a Blu-ray Disc with secondary video is played. Keeping the PIP mark off avoids distraction from normal movie watching.

5.SAP Mark (on/off): To turn on/off the display of a Secondary Audio Program mark when a Blu-ray Disc with secondary video and audio is played. Keeping the SAP mark off avoids distraction from normal movie watching.

6SACD Priority: To select which audio layer to play for SACD (Super Audio CD). The options are:

•Multi-Channel– Play the multi-channel surround audio layer

•Stereo – Play the 2-channel stereo audio layer

•CD Mode – Play the CD layer of a hybrid SACD disc

7.Auto Play Mode (on/off): To select whether the player shall start playing an audio CD or SACD automatically. When auto play mode is turn on, these discs will start playing upon insertion into the player. When auto play mode is turned off, the player will wait for the user to start playback by pressing the PLAY button.

8.PBC – Play Back Control: To enable/disable Play Back Control. Play Back Control is a primitive form of disc menu. The options are:

•On – If the disc contains Play Back Control, show the menu.

•Off – Play back the contents by sequence.

Video Setup

The “Video Setup” section of the Setup Menu system allows you to configure video output options. The menu items in this section are:

Setup Menu

Playback Setup	Picture Adjustment
Video Setup	Primary Output	HDMI
	TV Aspect Ratio	16:9 Wide
Audio Format Setup
Audio Processing	TV System	NTSC
Device Setup	Output Resolution	Auto
Network Setup	1080p24 Output	Off
Exit	DVD 24p Conversion	Off

Adjust picture control parameters

Exit

1.Picture Adjustment: To adjust picture control parameters. The Lexicon BD-30 Blu-ray Disc Player provides a wide array of picture controls. Please refer to the Picture Adjustment section on page 57 of this manual for details of each control.

2.Primary Output: To select the primary video output port. The options are:

•HDMI – Use HDMI as the primary video output port. This setting will ensure that the HDMI output gets the best possible picture quality. The VRS video processor will be used unless “Source Direct” output resolution is selected, in which case VRS video processing is bypassed. Component and composite video output may not be available or may be limited to a lower resolution based on content source limitations.

•Component – Use component video as the primary video output port. This setting will ensure that the component output will always be available and displays proper video signals. With this configuration, the video decoder in the

53