Lexicon BD-30 manual Command Sequence, Command List, Command that maps to a remote control button

BD-30 Blu-ray Disc Player Appendix

The illustration of the response structure is as follows:

<Response> = <Start of Response><Result Code> [<sp><Parameters>]<End of Response>

<Start of Response> = @, ASCII 0x40 <Result Code> = OKER

<sp> = space, ASCII 0x20 <Parameters> = command-specific <End of Response> = CR, ASCII 0x0d

Command Sequence:

Commands are executed in the order they are received. The host should wait for a response from the player before sending the next command.

If the player receives a new command before executing the previous command, the player may discard the previous command.

If the host does not receive a response from the player 10 seconds after the command is issued, the host may consider the command or response lost during transmission, and can retransmit the command.

Command List:

A. Command that maps to a remote control button

This group of commands maps directly to the infrared remote control keys. No parameters are needed for these commands. The player handles the commands as if it receives the same IR remote commands. For actions that require multiple key sequence, such as go to a certain chapter (GOT command followed by multiple numeric key commands and the SEL command), the player responds to each command individually until the last command is received. At that time the player shall respond with either OK or ER depending on the result of the action.

Code	Remote Key	Function	Special Response
POW	POWER	Toggle power STANDBY and ON	OK ON
			OK OFF
SRC	SOURCE	Go to Home Menuto select media source
EJT	OPEN	Open/close the disc tray	OK OPEN
			OK CLOSE
PON	ON	Discrete on	OK ON
POF	OFF	Discrete off	OK OFF
SYS	P/N	Switch output TV system: NSTC, PAL or	OK NTSC
		MULTI(AUTO)	OK PAL
			OK AUTO
DIM	DIMMER	Dim front panel display	OK ON
			OK DIM
			OK OFF
PUR	PURE AUDIO	Pure audio mode (no video)	OK ON
			OK OFF
VUP	VOL +	Increase volume	OK n (n is the volume
			number, 0 – 100)
VDN	VOL -	Decrease volume	OK n (n is the volume
			number, 0 – 100)
MUT	MUTE	Mute audio	OK MUTE
			OK UNMUTE
NU1	1	Numeric key 1
NU2	2	Numeric key 2

81