Samsung SRD-830, 870D, 1670D, 1650D Selecting a Spot Out mode, Switching to Single Mode

Switching to Single Mode

When in split mode, select and double-click a desired channel to switch to its Single mode.

Press the number corresponding to a desired channel on the front panel or the remote control to switch to its Single mode.

Refer to “Remote Control > Using the numeric buttons”. (Page 13)

`Ex : If double-clicking CH 3 or pressing the number “3” on the remote control or the front panel.

CH1	CH2	CH3	CH4
CH5	CH6	CH7	CH8	;
CH9	CH10	CH11	CH12
CH13	CH14	CH15	CH16	CH3

Spot Out

The Spot Out monitoring is independent of the Live mode, which monitors a specific channel through the Spot Out port.

Selecting a Spot Out mode

If an event occurs such as sensor, motion or alarm from the Spot Out port in connection with a monitor, you
can select a output screen mode.
1.	In Live mode, right-click any area on the screen.	Scene Mode 					CH1
	The Live menu appears.	Spot Out		Spot Out 1		16-split	CH2
							CH3
.		Audio Off		Spot Out 2		9-split
	Click Spot Out.	Freeze		Spot Out 3		4-split	CH4
							CH5
		Stop Alarm
				Spot Out 4		Auto Sequence	CH6
		Record				Single 	CH7
	The split screen appears according to the Spot Out source.	Play					CH8
	(Page 53)	Search					CH9
							CH10
		Backup
	` Spot Out 1 : Supports 16-, 9-, 4-split, Auto Sequence and Single	Main Menu					CH11
							CH12
		Shutdown					CH13
	modes.	Hide Launcher					CH14
							CH15
	` Spot Out 2, 3, 4 : Supports 4-split, Auto Sequence and Single	Logout					CH16
	modes.
	` The number of Spot Out terminals differs according to the model.	< Multichannel Live Menu >
	For the Spot Out port of a model, refer to “Part Names and
	Functions (Rear)”. (Page 10)

! live

English _33