Samsung 1650D, 870D, 1670 Event Record Duration, REC Quality / Resolution, Recording Color Tags

Recording Color Tags

Color	Function	Description
White	No Recording	No schedule / event recording
Orange	Continuous	Scheduled recording only
Blue	Event	Event recording only
Green	Both(Cont&Evnt)	Both scheduled / event recordings

Each press of a selected cell will cycle through <No Recording>-<Continuous>-<Event>- <Both(Cont&Evnt)>.

Event Record Duration

You can set the beginning and ending point of a recording on an event.

Using the mouse may help make setup easier.
3. Use the up/down buttons (▲▼) in <Record> window to
	Event Record Duration
move to <Event Record Duration>, and press [ENTER]
	CH	Pre Event 		POST Event 
button.
	1	OFF		1 min	
4. Use direction buttons (▲▼_ +) to move to a desired	2	OFF		1 min	
	3	OFF		1 min	
item, and set the value.	4	OFF		1 min	
	5	OFF		1 min	
~ Pre Event : The recording of an event will start at a	6	OFF		1 min	
	7	OFF		1 min	
pre-determined time prior to the actual occurrence of the event.	8	OFF		1 min	
				Previous/Next Page
If it is set to 5 seconds, the recording begins from 5
seconds before the event.
		OK		Cancel

~POST Event : The recording will continue for a pre-determined time after the actual end of an event.

If it is set to 5 seconds, the recording ends in 5 seconds after an event.

5.When the event recording duration setup is done, press <OK>.

REC Quality / Resolution

You can set resolution, IPS, and quality of recordings by channel, and by recording type of standard / event.

Setting Standard Recording Properties

You can set each channel’s resolution, quality and IPS for normal recordings.

Using the mouse may help make setup easier.

! using the dvr

3.Use the up/down buttons (▲▼) in <Record> window to move to <REC Quality & Resolution>, and press [ENTER] button.

4.Select <Standard>.

5.When the recording setup is done, press <OK>.

~Remaining count : If you change the settings of the resolution and the remaining rate, the frame rate available for each resolution will be recalculated.

`The <Remaining count> will be displayed only for SRD-830/ 830D/850/850D/1610/1610D/1630/1630D/1650/1650D models.

REC Quality & Resolution

Standard	Event
Remaining count : 4CIF(L) : 90			2CIF(M) : 180			CIF(S) : 360
CH	Resolution 			Record Rate 		Record Quality 
1	CIF(S)			7.5ips		Level4	
2	CIF(S)			7.5ips		Level4	
3	CIF(S)			7.5ips		Level4	
4	CIF(S)			7.5ips		Level4	
5	CIF(S)			7.5ips		Level4	
6	CIF(S)			7.5ips		Level4	
7	CIF(S)			7.5ips		Level4	
8	CIF(S)			7.5ips		Level4	
						Previous/Next Page
			OK	Cancel

`SRD-870/870D/1670/1670D models have no limitations on the remaining rate.

English _55