Samsung 870D, 1670D You can change the split mode by clicking each number icon, Single Mode

Page 78

web viewer

OSD INFORMATION DISPLAY

The channel number, video size, and IP address of the connected DVR are displayed.

The current date and time will be displayed according to the selected time information display setting <DVR Time> or <PC Time>.

Alarm icon appears when alarm is issued.

It disappears when pressed the [ALARM] button of the DVR.

Motion icon appears when motion is detected.

It disappears when pressed the [ALARM] button of the DVR. It displays whether the PTZ controls are active.

M	` If you have set PTZ cameras for the DVR, “PTZ” is displayed on the
	screen. Select a PTZ camera channel and use the [PTZ] button for camera control.

SPLIT-SCREEN

You can change the split mode by clicking each number icon.


SINGLE MODE	QUAD MODE	NINE MODE	SIXTEEN MODE

~ Click <> button.

The screen displays the selected camera connected to the DVR in

“SINGLE MODE”.

~Click <> button.

The screen displays the selected camera connected to the DVR in “QUAD MODE”.

~Click <> button.

The screen displays the selected camera connected to the DVR in “NINE MODE”.

~Click <> button.

The screen displays the selected camera connected to the DVR in “SIXTEEN MODE”.

~Click <> button.

The screen displays the selected camera connected to the DVR in

“FULL SCREEN MODE”.

Double clicking on the screen or pressing any button of the keyboard returns to the previous mode.

78_ web viewer

Image 78

Contents Channel/16 Channel DVR Features OverviewImportant Safety Instructions Overview~ Normal voltage Before StartOtherwise there may be a possibility of an explosion ~ Normal capacity 170mAhPackage Contents Standards ApprovalsContents Web viewer Backup viewerSearch & play AppendixOverview Mode AlarmREC AudioPart Names and Functions Rear 830/830D 1610/1610D/1630/1630D870/870D Loop OUT Audio OUTVideo Video OUTRemote Control Using the numeric buttonsPress each button between 1 to Changing the Remote Control ID ChannelPress any button among 1 to Checking the installation environment Please take note of the followings before using this productRack Installation HDD AdditionIf adding HDDs to SRD-830/850/870/1610/1630/1650/1670 First, loosen the screws on both sides and remove the coverIf adding HDDs to SRD-830D/850D/870D/1610D/1630D/1650D/1670D ` SRD-830/1610/1630 do not support DVD mediaInsta Connecting the Video, Audio, and Monitor Connecting the USB` The following figures are based on Model SRD-1670D Connecting the Alarm Input/Output Connecting External Sata HDDConnecting POS Device . Alarm Out Port Connecting with other deviceProduct first Connecting the RS-485 DeviceRS-485 device when connecting it DifferentConnecting the Network Connecting to Internet through Ethernet 10/100/1000BaseTConnecting to the Internet using the router Connecting to Internet through Adsl Getting Started Starting the systemShutting Down the System Login ` By default, initial ID and password are set to admin,Locking All Buttons Live Screen Configuration Icons on the Live ScreenSplit Mode Menu Error InformationSplit Mode Menu Single Mode MenuSingle Mode Menu ZoomView the Launcher Menu PTZSwitching the split mode Live ModeSwitching the screen mode Auto SequenceChannel Setting Manual Switching~ If pressing the right + button in 4-split mode Selecting a Spot Out mode Switching to Single ModeSpot Out Audio ON/OFF Audio ON/OFF in Single modeZoom FreezeEvent Monitoring System Setup Setting the Date/Time/LanguageDate/Time/Language Setting Holiday Using the CalendarWhen the administrator setup is done, press OK Setting the AdministratorUsing Virtual Keyboard Permission ManagementSetting the Group To set the group authorityTo restrict the user permissions To change the user passwordLogin UserName, ID, viewer, Select Group and password Setting the UserSetting Permissions When the user setup is done, press OKSystem Management Checking the System InformationSystem Management ~ Updating the Software System Upgrade BroadcastS/W Upgrade Center for assistanceSettings Log InformationSystem Log Backup Log Backup LogEvent Log Press the Menu button on the remote control or front Setting the DeviceSetting the Camera CameraSetting the PTZ Usingthe dvrWhen the PTZ setup is done, press OK You can check information on storage devices Storage DeviceConfirming Devices To move to the previous menu, press OKHDD Alarm FormattingAppears on the Live screen Remote DevicesPOS Devices Will not be savedPreset Setup POS Device SetupSync Channel Setup Add PresetMonitor Setting the MonitorScreen Setup MonitorWhen the Spot Out is done, press OK Setting the Spot OutSetting the Screen Mode You can configure the Live screen and Split ScreensRecord Setting the RecordingRecording Schedule Recording ScheduleEvent Record Duration REC Quality / ResolutionSetting Standard Recording Properties Recording Color TagsRecord Option Setting Event Recording PropertiesResolution CifsOFF Sensor does not operate Setting the EventSensor Detection Normal Close Sensor is closedSetting the Motion Detection Area Motion DetectionWhen the Alarm Schedule setup is done, press OK Alarm ScheduleStop the alarm by canceling the schedule Alarm ScheduleYou can backup the desired data to a connected device BackupSetting the Backup BackupSetting the Connection Network ConfigurationConnection Mode You can set the network connection route and protocolButton Select Protocol Setting the ProtocolMove to Connection Mode, and press Enter UDPConnecting and Setting the Network When no router is usedInternal Port Range Set the same to the External Port Range When a router is used192.168.0.254 NetworkDdns Setting Live TransferLive Transfer Event Setting Mailing ServiceSmtp Setting Mailing ServiceGroup Setting Recipient SettingGroupAdd recipient PTZ Device Using the PTZ cameraControlling a PTZ device Getting started with PTZPreset Setting Camera SettingExit System Info Time Search It does not appear in Backup SearchSearch You can search for recorded data of a desired timeEvent Search Backup SearchDetailed mode above HoursPOS Search POS SearchMotion Search Motion SearchPlayback PlayWhat is Web Viewer? Introducing Web ViewerConnecting Web Viewer General usersWeb viewer Using Live Viewer Single Mode You can change the split mode by clicking each number iconSingle Mode Quad Mode Nine Mode Sixteen Mode Full Screen ModeSetting the display of the OSD time information Connected DVRCH1 to CH4 ~ Capture Saves the current screen into a BMP or Jpeg fileChanging the Live Screen Channel ` Tilt of Power PTZ operates properly within Pan/Tilt of the Smart dome camera is manipulatedEx Samsung SCC-C6475 Using Search Viewer Single Mode Quad Mode To stop recording, click this button again Web Viewer\VideoClip\Search. To change the saving pathSearching the Recorded Video in the Calendar System Viewer SetupYou can configure the various settings of the DVR system Date/Time/LanguageHoliday Permission ManagementSystem Management Storage Device DeviceCamera ~ PTZRemote Device POS DeviceMonitor Record ~ Mode You can switch between live mode and play modeFor more information, refer to Setting the Recording. Recording ScheduleEvent Record Duration REC Quality & ResolutionEvent Record OptionMotion Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Video Loss DetectionNetwork For more information, refer to Network Configuration.You can check the Ddns settings ConnectionMailing Service ~ SmtpAbout SEC Backup Viewer Recommended System RequirementsBetween activated and deactivated You can adjust the volume level from 0 toSpeed will restore to BMP and JpegProduct Specification SRD-830/830D/1610/1610D/1630/1630D Ntsc PALHDD 2CIFM4CIFL DIX ! AppenPlay Single /4-/9-/13-splits Display ModeDetails Single /4-/9-/13-/16-splits USB Memory USB HDD-MAX 1USB hub not supported NetworkInput Voltage SRD-850/850D/1650/1650D BNC Type VGA 1 ChannelAudio 5dBm, 600Ω Channel RCA Type USB HDD Sata HDDSata HDD-MAX Product OVERView ~ SRD-1670DDefault Setting Category Details Factory DefaultManagement Duration Category Details Factory Default Video Loss State OFFRecording Troubleshooting DVR 4CIF2CIFCIF Version 2, June Open Source License Report on the ProductPreamble USAPage No Warranty How to Apply These Terms to Your New Programs Terms and Conditions Source CodeConveying Verbatim Copies Additional Terms Page Patents Use with the GNU Affero General Public LicenseRevised Versions of this License Limitation of Liability Interpretation of Sections 15END of Terms and Conditions Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries OpenSSL License Original SSLeay LicensePage Correct disposal of batteries in this product Samsung Techwin America Inc TEL +44-1932-45-5300 FAX +44-1932-45-5325