Samsung SRD-1650D, 870D, 1670D, SRD-850D, SRD-830D, SRD-1630D, SRD-1610D user manual Playback

Playback
Play
You can play data stored in the HDD and backup a desired portion of the data.					lay
Using the mouse may help make setup easier.
1. In Live mode, click <Play> in the right-click menu or		Scene Mode 
<	> in the launcher menu, or press the Play button on	Spot Out	
the remote control or the front panel.		Audio Off			!
		Freeze
2. Use the up/down button (▲▼) to select a menu.		Stop Alarm			search
		Record
` For data search, refer to <Search>. (Page 70)		Play
		Search
		Backup
		Main Menu
		Shutdown
					&
		Hide Launcher
					p
		Logout
			PTZ	Alarm	Freeze

3.Select a data item and click <Play> in the Search menu. The selected data is played and the play launcher appears on the screen.

`If there is an existing data, <Play> will start immediately without performing the search.

~ : You can play up to 4 channels in real time.

-In a split mode, the real time playback may not be supported, depending on the record quality, resolution and number of channels. And some frame rates may be supported.

REC

~Playback Information : Displays the date and time of the current data in the top corner.

~Mode Switch : Select a desired play mode or press the [MODE] button to switch the mode in the sequence of 1-split, 4-split, 9-split, 16-split and 13-split.

`The grey area in the center of the 13-split mode plays the Live channel. The default channel of the Live mode is CH1, which can be changed later.

~ : Switches to Live mode.

~ REC : Records all channels in Live mode.

~Play Time : Displays the time and date of the current video.

~Play Bar : Displays the time of recorded data in the selected channel for the past 24 hours; the red gridline indicates the current play time.

M ` Speed : Supports various speed options of x1, x2(-2), x4(-4), x8(-8), x16(-16), x32(-32) and x64(-64).

`Slow : Supports slow speed options of x1/2(-1/2), x1/4(-1/4) and x1/8(-1/8).

~Backup : Click < > to set the current time to the start time of backup; you can specify a backup area using the mouse (yellow triangle).

Click < > again to set the current time to the end time of the backup and the “Backup Range” window appears.

-Type : Supports formats of DVR, AVI and SEC. Refer to a list of formats in “Setting the Backup”. (Page 60)

-Device : Select a backup device.

-Check Capacity : Enables you to check the capacity of the selected storage device.

Backup Range
 Start		 End
2010-01-01 00:01:06		2010-01-01 08:25:45
 Device	USB-Storage	 Type	DVR
 Folder	\20100101\	 Filename	0001	Change
Check capacity		Backup
		Used
		Free
	Backup	Cancel

4.If you want to return to the Live screen in Play mode, click < > in the launcher menu or press the [@] button on the remote control or the front panel.

English _73