Samsung 870D, 1670D Mailing Service, Smtp Setting, Event Setting, Sets the Smtp mail server

using the DVR

Mailing Service

You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs.

M	` If an event occurs with a channel where the camera’s video is set to <OFF> or the remaining recording count is set
	to <OFF>, only the text notification will be sent to the applicable email address.

SMTP Setting

Sets the SMTP mail server.

Using the mouse may help make setup easier.

3.In the <Network> setting window, press the up/down

(▲▼) button to move to <Mailing Service> and press the [ENTER] button.

4.Select <SMTP>.

You will see the SMTP setting window.

5.Use direction buttons (▲▼_ +) to move to a desired item and set the value.

~ServerType : Displays the connected server type.

~Server : Enter a server to connect to.

~Port : Sets the communication port.

Mailing Service
SMTP	Event	Group	Recipient
 ServerType	SMTP mail Server
 Server
 Port	25
Use Authentication
 User
 Password	********
 Secure Transfer	Never
 Sender			ex. user@example.net
TEST
	OK	Cancel

~Use Authentication : Check this if the SMTP server uses user authentication. The account input box will be activated.

~User : Enter a user to use authentication when connecting to the SMTP server.

~Password : Enter the password of the SMTP server user.

~Secure Transfer : Select one from <Never> and <TLS (if available)>.

~Sender : Use the virtual keyboard to enter the sender’s e-mail address. ` Refer to “Using Virtual Keyboard”. (Page 38)

~TEST : Conducts the test on the server settings.

6.When the SMTP setting is done, press <OK>.

Event Setting

You can set the interval and type of the event that will be sent to the user.

Using the mouse may help make setup easier.

3.In the <Network> setting window, press the up/down

(▲▼) button to move to <Mailing Service> and press the [ENTER] button.

4.Select <Event>.

5.Use direction buttons (▲▼_ +) to move to a desired item and set the value.

~Event Interval : Set the event interval.

`If a series of events occurs, the e-mail will be sent at the specified interval, not on each event.

Mailing Service

SMTP	Event	Group	Recipient
 Event Interval	10 min
Use Event Transfer
Sensor	Motion
Change P/W	HDD Info		Video Loss
Power On/Off	Manual Record
	OK	Cancel

~Use Event Transfer : Select an event type to send if an event occurs.

If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.

6.When the event setting is done, press <OK>.

66_ using the DVR