Samsung 870D, 1670D, SRD-850D, SRD-830D, SRD-1650D, SRD-1630D Live Transfer, Ddns Setting

Page 65

DDNS Setting

DDNS is a short form of Dynamic Domain Naming System.

DNS (Domain Name System) is a service that routes a domain name consisting of user friendly characters (ex : www.google.com) to an IP address consisting of numbers (64.233.189.104).

DDNS (Dynamic DNS) is a service that registers a domain name and the floating IP address with the DDNS server so that the domain name can be routed to the IP address even if the IP is changed in a dynamic IP system.

~Setting DDNS in the DVR

Set <Protocol Type> in the <Protocol> menu of the connected DVR to the following : Ex) Protocol Type : TCP

Port (TCP) : 0554,0555,0556,0557

DDNS Site : Samsung DDNS

~DDNS Settings of the Router

Select the corresponding menu for the network transfer protocol of the router.

Live Transfer

Sets the quality of the image that is transferred from the DVR to the network.

Using the mouse may help make setup easier.

! using the dvr

3.In the <Network> setting window, press the up/down (▲▼) button to move to <Live Transfer> and press the [ENTER] button.

The Live Transfer window appears.

4.Use the direction buttons (▲▼_ +) to move to a desired item and set the value.

5.When the live transfer is done, press <OK>.

`For the resolution of the live transfer, refer to “Resolution”. (Page 56)

Live Transfer

 

 

Resolution

CIF(S)

 

Quality

Low

 

 

OK

Cancel

English _65

Image 65
Contents Channel/16 Channel DVR Overview FeaturesOverview Important Safety InstructionsOtherwise there may be a possibility of an explosion Before Start~ Normal voltage ~ Normal capacity 170mAhStandards Approvals Package ContentsContents Search & play Backup viewerWeb viewer AppendixOverview REC AlarmMode Audio830/830D 1610/1610D/1630/1630D Part Names and Functions Rear870/870D Video Audio OUTLoop OUT Video OUTPress each button between 1 to Remote ControlUsing the numeric buttons Press any button among 1 to Changing the Remote Control IDChannel Please take note of the followings before using this product Checking the installation environmentHDD Addition Rack InstallationFirst, loosen the screws on both sides and remove the cover If adding HDDs to SRD-830/850/870/1610/1630/1650/1670` SRD-830/1610/1630 do not support DVD media If adding HDDs to SRD-830D/850D/870D/1610D/1630D/1650D/1670DInsta ` The following figures are based on Model SRD-1670D Connecting the Video, Audio, and MonitorConnecting the USB Connecting POS Device Connecting External Sata HDDConnecting the Alarm Input/Output . Alarm Out Port Connecting with other deviceRS-485 device when connecting it Connecting the RS-485 DeviceProduct first DifferentConnecting to the Internet using the router Connecting the NetworkConnecting to Internet through Ethernet 10/100/1000BaseT Connecting to Internet through Adsl Shutting Down the System Getting StartedStarting the system Locking All Buttons Login` By default, initial ID and password are set to admin, Icons on the Live Screen Live Screen ConfigurationSplit Mode Menu Error InformationSplit Mode Menu Single Mode MenuZoom Single Mode MenuPTZ View the Launcher MenuSwitching the screen mode Live ModeSwitching the split mode Auto Sequence~ If pressing the right + button in 4-split mode Channel SettingManual Switching Spot Out Selecting a Spot Out modeSwitching to Single Mode Zoom Audio ON/OFF in Single modeAudio ON/OFF FreezeEvent Monitoring Date/Time/Language System SetupSetting the Date/Time/Language Using the Calendar Setting HolidayUsing Virtual Keyboard Setting the AdministratorWhen the administrator setup is done, press OK Permission ManagementTo set the group authority Setting the GroupLogin To change the user passwordTo restrict the user permissions UserSetting Permissions Setting the UserName, ID, viewer, Select Group and password When the user setup is done, press OKSystem Management System ManagementChecking the System Information  BroadcastS/W Upgrade System Upgrade~ Updating the Software Center for assistanceSystem Log SettingsLog Information Event Log Backup LogBackup Log Setting the Camera Setting the DevicePress the Menu button on the remote control or front CameraWhen the PTZ setup is done, press OK Setting the PTZUsingthe dvr Confirming Devices Storage DeviceYou can check information on storage devices To move to the previous menu, press OKFormatting HDD AlarmPOS Devices Remote DevicesAppears on the Live screen Will not be savedSync Channel Setup POS Device SetupPreset Setup Add PresetScreen Setup Setting the MonitorMonitor MonitorSetting the Screen Mode Setting the Spot OutWhen the Spot Out is done, press OK You can configure the Live screen and Split ScreensRecording Schedule Setting the RecordingRecord Recording ScheduleSetting Standard Recording Properties REC Quality / ResolutionEvent Record Duration Recording Color TagsResolution Setting Event Recording PropertiesRecord Option CifsSensor Detection Setting the EventOFF Sensor does not operate Normal Close Sensor is closedMotion Detection Setting the Motion Detection AreaStop the alarm by canceling the schedule Alarm ScheduleWhen the Alarm Schedule setup is done, press OK Alarm ScheduleSetting the Backup BackupYou can backup the desired data to a connected device BackupConnection Mode Network ConfigurationSetting the Connection You can set the network connection route and protocolMove to Connection Mode, and press Enter Setting the ProtocolButton Select Protocol UDPWhen no router is used Connecting and Setting the Network192.168.0.254 When a router is usedInternal Port Range Set the same to the External Port Range NetworkLive Transfer Ddns SettingLive Transfer Smtp Setting Mailing ServiceEvent Setting Mailing ServiceGroupAdd recipient Group SettingRecipient Setting Controlling a PTZ device Using the PTZ cameraPTZ Device Getting started with PTZExit System Info Preset SettingCamera Setting Search It does not appear in Backup SearchTime Search You can search for recorded data of a desired timeDetailed mode above Backup SearchEvent Search HoursMotion Search POS SearchPOS Search Motion SearchPlay PlaybackIntroducing Web Viewer What is Web Viewer?General users Connecting Web ViewerWeb viewer Using Live Viewer Single Mode Quad Mode Nine Mode Sixteen Mode You can change the split mode by clicking each number iconSingle Mode Full Screen ModeConnected DVR Setting the display of the OSD time information~ Capture Saves the current screen into a BMP or Jpeg file CH1 to CH4Changing the Live Screen Channel Ex Samsung SCC-C6475 ` Tilt of Power PTZ operates properly withinPan/Tilt of the Smart dome camera is manipulated Using Search Viewer Single Mode Quad Mode Web Viewer\VideoClip\Search. To change the saving path To stop recording, click this button againSearching the Recorded Video in the Calendar You can configure the various settings of the DVR system Viewer SetupSystem Date/Time/LanguagePermission Management HolidaySystem Management Camera DeviceStorage Device ~ PTZMonitor Remote DevicePOS Device For more information, refer to Setting the Recording. ~ Mode You can switch between live mode and play modeRecord Recording ScheduleEvent REC Quality & ResolutionEvent Record Duration Record OptionYou can set the alarm output time if a video loss occurs Alarm ScheduleMotion Detection Video Loss DetectionYou can check the Ddns settings For more information, refer to Network Configuration.Network Connection~ Smtp Mailing ServiceAbout Recommended System Requirements SEC Backup ViewerSpeed will restore to You can adjust the volume level from 0 toBetween activated and deactivated BMP and JpegNtsc PAL Product Specification SRD-830/830D/1610/1610D/1630/1630D4CIFL 2CIFMHDD DIX ! AppenDetails Single /4-/9-/13-/16-splits Display ModePlay Single /4-/9-/13-splits USB Memory USB HDD-MAX 1USB hub not supported NetworkAudio 5dBm, 600Ω Channel RCA Type Input VoltageSRD-850/850D/1650/1650D BNC Type VGA 1 Channel Sata HDD USB HDDSata HDD-MAX ~ SRD-1670D Product OVERViewManagement Default SettingCategory Details Factory Default Duration Recording Category Details Factory Default Video Loss StateOFF Troubleshooting DVR 4CIF2CIFCIF Preamble Open Source License Report on the ProductVersion 2, June USAPage No Warranty How to Apply These Terms to Your New Programs Source Code Terms and ConditionsConveying Verbatim Copies Additional Terms Page Revised Versions of this License PatentsUse with the GNU Affero General Public License END of Terms and Conditions Limitation of LiabilityInterpretation of Sections 15 Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries Original SSLeay License OpenSSL LicensePage Correct disposal of batteries in this product TEL +44-1932-45-5300 FAX +44-1932-45-5325 Samsung Techwin America Inc