Samsung SRD-850D, 870D, 1670 Record Option, Setting Event Recording Properties, Resolution, Cifs

using the DVR

Setting Event Recording Properties

You can set each channel’s resolution, quality and IPS for event recordings.

Using the mouse may help make setup easier.

3.	Use the up/down buttons (▲▼) in <Record> window to	REC Quality & Resolution
	move to <REC Quality & Resolution>, and press	Standard	Event		Record Rate 		Record Quality	
	[ENTER] button.	CH	Resolution 
	Select <Event>.	Remaining count : 4CIF(L) : 90			2CIF(M) : 180		CIF(S) : 360
4.		2	CIF(S)		7.5ips		Level4	
		1	CIF(S)		7.5ips		Level4	
	Event recording setup window appears.	3	CIF(S)		7.5ips		Level4	
		4	CIF(S)		7.5ips		Level4	
5.	Use direction buttons (▲▼_ +) to move to a desired	5	CIF(S)		7.5ips		Level4	
		6	CIF(S)		7.5ips		Level4	
	item, and select it.	8	CIF(S)		7.5ips		Level4	
		7	CIF(S)		7.5ips		Level4	
~ Resolution : Sets the resolution of the recorded screen.							Previous/Next Page

`	If you set the resolution to <4CIF(L)>, SRD-850/850D/1650/	OK Cancel
	1650D support up to 4 channels while SRD-1630/1630D support
	up to 2 channels and SRD-830/830D/1610/1610D support just one channel.

Resolution

Name	Resolution	Description
CIF(S)	NTSC: 352 X 240, PAL: 352 X 288	Samples each half of horizontal and
		vertical screen.
2CIF(M)	NTSC: 704 X 240, PAL: 704 X 288	Samples half of the horizontal screen.
4CIF(L)	NTSC: 704 X 480, PAL: 704 X 576	Samples original screen size.

~Record Rate : Image Per Second, means the frames recorded per a second.

~Record Quality : Sets the recording quality.

M	` The estimated total remaining count for SRD-830/830D/850/850D/1610/1610D/1630/1630D/1650/1650D means
	the total number of remaining recordings for both standard and event recordings.

`You cannot increase the remaining count if the current remaining count has reached zero or there is no available remaining count from any other page. If this is the case, reduce the remaining count for the current page, or do so for the same channel on any other page.

6.When the Event recording setup is done, press <OK>.

Record Option

You can set the recording to stop or overwrite when the HDD is full.

Using the mouse may help make setup easier.

3.Use the up/down buttons (▲▼) in <Record> window to move to <Record Option>, and press [ENTER] button.

4.Use direction buttons (▲▼_ +) to move to a desired item, and set the value.

Record Option

 Disk End Mode
		Overwrite
		Disk End Beep
	Auto Delete		day
		99

OK Cancel

56_ using the DVR