ARRI instruction manual Mounting the WRC-2 on the WMU-3 or WMU-2

5.2Mounting the WRC-2 on the WMU-3 or WMU-2

●Switch off the Wirless Main Unit WMU by pressing the ON/OFF button.

●With the wide black pin pointing forward, insert the WRC-2 into the free space on the WMU. Then press the WRC-2 onto the WMU until the module audibly snaps into position.

●Select the same radio channel on the WMU and on the receiver (e.g. Lens Data Box)

Note:

The WRC-2 can not be mounted on a WMU-3 together with other modules without using the Wireless Expansion Bracket (WEB-3).

Note:

Do not seperate the hand control units from one another when they are switched on, as this can result in randomly set lens limits.

Setup

13