ARRI WRC-2 instruction manual Ramp Control Menu Enabling the Iris Control

Page 42

Ramp Control Menu

14.1 Enabling the Iris Control

In order to compensate ramps via the iris or to program an iris ramp, please check if:

1.) The Iris Table is activated in the Lens Manager To activate an Iris Table navigate to the Lens Manager. Please refer to chapter 13.

2.) The Iris Control is enabled. To enable the Iris Conrol:

●In the Set Ramp Menu, click on „Options“.

●In the Options Menu, click on „Enable Iris Control“. If you can not activate the checkbox, no lens is mounted. Please navigate to the Lens Manager (see Chapter 13) and mount a lens.

Note:

When the Iris Control is enabled, the iris motor will set the iris automatically to the value entered in the Ramp Control Menu. To manually set the iris, switch the Iris Control off.

Ramp Control Menu

Ramp Options Menu

42

Image 42

Contents WRC-2 Page Order Numbers Contents Change Ramp Direction Safety Instructions General Safety InstructionsSpecific safety instructions Disclaimer Disclaimer Introduction Introduction Setup TransmittingReceiving Mounting the WRC-2 on the WMU-3 or WMU-2 WRC-2 & Arricam Studio and Lite WRC-2 & Arriflex 435 Xtreme / AdvancedWRC-2 & Arriflex WRC-2 & other Arri CamerasWired Configurations Direct connection via the Camera ConnectorConnection via Universal Remote Controller URM-3 LCS CablesWRC-2 & Arricam Studio and Lite Possible Connections WRC-2 & Arriflex 435 Xtreme / Advanced Possible ConnectionsWRC-2 & Arriflex 416 Possible Connections Powering Up The Unit Using the StylusIntroduction First Steps Key Navigation General Operation and NavigationTouchscreen Navigation Lock/UnlockFunctions Menu Structure „Exit and „Edit ButtonsMain Menu Starting a Software ModuleWRC-2 Settings Menu Camera Control MenuSettings Window Status Window LDS e.g mm T1.9 Following values and settings are displayed Battery VoltageStatus Window Message & Warnings FieldChoose from a preset camera speed Camera Control Menu Changing Camera SpeedEnter a user defined camera speed Add all default speed values Editing Preset Speeds & Change Camera DirectionDelete items from the preset list Add a user defined speed valueChoose from a preset camera shutter angle Changing Camera Mirror ShutterEdit a specific camera shutter angle Editing Preset Camera Shutter Angles Add all default camera shutter valuesAdd a user defined shutter angle value Camera Control Menu Filmcounter Sub-Menu Camera Control Options Sub-Menu Time Code on/off Camera Control Menu Time Code Sub-MenuTo enter the Time Code Sub-Menu TCS Time Code SensitivityTime / User Bits Lens Manager Menu Using a Lens with Lens Data SystemUsing a Lens without LDS Lens Manager Menu FunctionsRemove Iris Tables from the User Iris List Administer Iris Tables Create new Iris TablesLoad Iris Tables Add Iris Tables from the User Folder SystemCreating new Iris Tables with the Iris Table Wizard MenuLens Manager StepName the Iris Table Intentionally left blank Ramp Control Menu Ramp Control Menu Enabling the Iris Control Programming a Ramp Compensation via the iris Ramp Control Menu Exposure CompensationCompensation via the Mirror Shutter Mixed Compensation via Shutter and IrisTo Enable the Exposure Calculation Exposure CalculationUse the Exposure Calculation Enable „Compensation Free Style Ramp Control Menu Compensation Free StyleChange Ramp Direction Set to DefaultRamp Options Safe and Load a Ramp Save a RampRamp Control Menu Ramp Example External Display Menu Appendix Updating the WRC-2Cleaning Cleaning the Touchscreen Service Menu Exit from AppAdjusting the Knob Handwheel File DialogAppendix Troubleshooting Communication ProblemsNo Speed setting available Intentionally left blank Power Supply Technical Data DimensionsWeight Operating Temperature RangeArri Service Index Index Page Index