ARRI WRC-2 instruction manual Programming a Ramp

Page 43

14.2 Programming a Ramp

●Select the desired speed ramp function by clicking on the corresponding control button. (e.g. „Speed“)

●Click on the start and end values of the ramp display to edit the values. (e.g. 6fps and 96fps)

The ramp will always be perfomed from top to bottom. Therefore in this example the upper value will be the initial camera speed (6fps). The yellow marker displays the current camera speed.

●Click in the Ramp Time Window to select the timing control:

„Time“ = A user defined ramp time can be set „Time min“ = The fastest ramp will be computed and

	set by the WRC-2 automatically.
„Knob“	= The ramp can be controlled manually
	via the WRC-2 Knob / Handwheel.

●After running the camera the ramp can be performed by pushing the „Ramp“ button on the WRC-2 Make sure the keypad is not locked. To unlock the pad press the „Lock/Unlock“ key for three seconds.

-To compensate the Speed Ramp refer to 14.3

-To change the Ramp Direction refer to 14.5

Ramp Control Menu

Ramp Control Menu

43

Image 43

Contents WRC-2 Page Order Numbers Contents Change Ramp Direction General Safety Instructions Safety InstructionsSpecific safety instructions Disclaimer Disclaimer Introduction Introduction Transmitting SetupReceiving Mounting the WRC-2 on the WMU-3 or WMU-2 WRC-2 & Arriflex 435 Xtreme / Advanced WRC-2 & Arricam Studio and LiteWRC-2 & other Arri Cameras WRC-2 & ArriflexDirect connection via the Camera Connector Wired ConfigurationsLCS Cables Connection via Universal Remote Controller URM-3WRC-2 & Arriflex 435 Xtreme / Advanced Possible Connections WRC-2 & Arricam Studio and Lite Possible ConnectionsWRC-2 & Arriflex 416 Possible Connections Using the Stylus Powering Up The UnitIntroduction First Steps Lock/Unlock General Operation and NavigationTouchscreen Navigation Key NavigationFunctions „Exit and „Edit Buttons Menu StructureStarting a Software Module Main MenuCamera Control Menu WRC-2 Settings MenuSettings Window Status Window Message & Warnings Field Following values and settings are displayed Battery VoltageStatus Window LDS e.g mm T1.9Camera Control Menu Changing Camera Speed Choose from a preset camera speedEnter a user defined camera speed Add a user defined speed value Editing Preset Speeds & Change Camera DirectionDelete items from the preset list Add all default speed valuesChanging Camera Mirror Shutter Choose from a preset camera shutter angleEdit a specific camera shutter angle Add all default camera shutter values Editing Preset Camera Shutter AnglesAdd a user defined shutter angle value Camera Control Menu Filmcounter Sub-Menu Camera Control Options Sub-Menu TCS Time Code Sensitivity Camera Control Menu Time Code Sub-MenuTo enter the Time Code Sub-Menu Time Code on/offTime / User Bits Lens Manager Menu Functions Using a Lens with Lens Data SystemUsing a Lens without LDS Lens Manager MenuAdd Iris Tables from the User Folder System Administer Iris Tables Create new Iris TablesLoad Iris Tables Remove Iris Tables from the User Iris ListStep MenuLens Manager Creating new Iris Tables with the Iris Table WizardName the Iris Table Intentionally left blank Ramp Control Menu Ramp Control Menu Enabling the Iris Control Programming a Ramp Mixed Compensation via Shutter and Iris Ramp Control Menu Exposure CompensationCompensation via the Mirror Shutter Compensation via the irisExposure Calculation To Enable the Exposure CalculationUse the Exposure Calculation Ramp Control Menu Compensation Free Style Enable „Compensation Free StyleSafe and Load a Ramp Save a Ramp Set to DefaultRamp Options Change Ramp DirectionRamp Control Menu Ramp Example External Display Menu Updating the WRC-2 AppendixFile Dialog Service Menu Exit from AppAdjusting the Knob Handwheel Cleaning Cleaning the TouchscreenCommunication Problems Appendix TroubleshootingNo Speed setting available Intentionally left blank Operating Temperature Range Technical Data DimensionsWeight Power SupplyArri Service Index Index Page Index