ARRI WRC-2 Ramp Options, Change Ramp Direction, Set to Default, Safe and Load a Ramp Save a Ramp

Page 47

14.6 Ramp Options

In the Ramp Options Menu the Exposure Calculation and Iris Control can be enabled. Also the Ramp Direction can be changed and ramps can be saved and loaded.

●In the Ramp Menu click on „Options“ to enter the

Ramp Options Menu.

Change Ramp Direction:

●Click on „Change Ramp Direction“ in the Ramp Window and confirm the safety message.

Set to Default

●Will reset all ramp parameters to a standard speed ramp to provide a basic setting.

Safe and Load a Ramp

Save a Ramp

●Click on „Save Ramp as“ to save the actual Ramp. Note the name of the folder.

Load a Ramp

●Click on „Load Ramp“ and navigate to the folder where the Ramps are saved.

Ramp Control Menu

Ramp Options Menu

Ramp Control Menu

47

Image 47

Contents WRC-2 Page Order Numbers Contents Change Ramp Direction General Safety Instructions Safety InstructionsSpecific safety instructions Disclaimer Disclaimer Introduction Introduction Receiving SetupTransmitting Mounting the WRC-2 on the WMU-3 or WMU-2 WRC-2 & Arriflex 435 Xtreme / Advanced WRC-2 & Arricam Studio and LiteWRC-2 & other Arri Cameras WRC-2 & ArriflexDirect connection via the Camera Connector Wired ConfigurationsLCS Cables Connection via Universal Remote Controller URM-3WRC-2 & Arriflex 435 Xtreme / Advanced Possible Connections WRC-2 & Arricam Studio and Lite Possible ConnectionsWRC-2 & Arriflex 416 Possible Connections Introduction First Steps Powering Up The UnitUsing the Stylus Lock/Unlock General Operation and NavigationTouchscreen Navigation Key NavigationFunctions „Exit and „Edit Buttons Menu StructureStarting a Software Module Main MenuCamera Control Menu WRC-2 Settings MenuSettings Window Status Window Message & Warnings Field Following values and settings are displayed Battery VoltageStatus Window LDS e.g mm T1.9Enter a user defined camera speed Choose from a preset camera speedCamera Control Menu Changing Camera Speed Add a user defined speed value Editing Preset Speeds & Change Camera DirectionDelete items from the preset list Add all default speed valuesEdit a specific camera shutter angle Choose from a preset camera shutter angleChanging Camera Mirror Shutter Add a user defined shutter angle value Editing Preset Camera Shutter AnglesAdd all default camera shutter values Camera Control Menu Filmcounter Sub-Menu Camera Control Options Sub-Menu TCS Time Code Sensitivity Camera Control Menu Time Code Sub-MenuTo enter the Time Code Sub-Menu Time Code on/offTime / User Bits Lens Manager Menu Functions Using a Lens with Lens Data SystemUsing a Lens without LDS Lens Manager MenuAdd Iris Tables from the User Folder System Administer Iris Tables Create new Iris TablesLoad Iris Tables Remove Iris Tables from the User Iris ListStep MenuLens Manager Creating new Iris Tables with the Iris Table WizardName the Iris Table Intentionally left blank Ramp Control Menu Ramp Control Menu Enabling the Iris Control Programming a Ramp Mixed Compensation via Shutter and Iris Ramp Control Menu Exposure CompensationCompensation via the Mirror Shutter Compensation via the irisUse the Exposure Calculation To Enable the Exposure CalculationExposure Calculation Ramp Control Menu Compensation Free Style Enable „Compensation Free StyleSafe and Load a Ramp Save a Ramp Set to DefaultRamp Options Change Ramp DirectionRamp Control Menu Ramp Example External Display Menu Updating the WRC-2 AppendixFile Dialog Service Menu Exit from AppAdjusting the Knob Handwheel Cleaning Cleaning the TouchscreenNo Speed setting available Appendix TroubleshootingCommunication Problems Intentionally left blank Operating Temperature Range Technical Data DimensionsWeight Power SupplyArri Service Index Index Page Index