ARRI WRC-2 Service Menu Exit from App, Adjusting the Knob Handwheel, File Dialog

Page 51

16.2 Service Menu

Exit from App.

For service personnel only.

Adjusting the Knob (Handwheel)

For service personnel only :

Turn the knob to the left end stop and press „Adjust left“, then turn the knob to the right end stop and press „Adjust right“.

Turn the knob from end stop to end stop and check if the values change correspondingly.

File Dialog

For service personnel only.

16.3 Cleaning

Cleaning the Touchscreen

Any standard glass cleaner can be used to clean the touchscreen, but avoid products containing ammonia. Always spray the glass cleaner on the cloth or towel and then clean the touchscreen. Glass cleaner sprayed directly on the unit could possibly leak inside and cause damage.

Appendix

51

Image 51
Contents WRC-2 Page Order Numbers Contents Change Ramp Direction General Safety Instructions Safety InstructionsSpecific safety instructions Disclaimer Disclaimer Introduction Introduction Setup TransmittingReceiving Mounting the WRC-2 on the WMU-3 or WMU-2 WRC-2 & Arriflex 435 Xtreme / Advanced WRC-2 & Arricam Studio and LiteWRC-2 & other Arri Cameras WRC-2 & ArriflexDirect connection via the Camera Connector Wired ConfigurationsLCS Cables Connection via Universal Remote Controller URM-3WRC-2 & Arriflex 435 Xtreme / Advanced Possible Connections WRC-2 & Arricam Studio and Lite Possible ConnectionsWRC-2 & Arriflex 416 Possible Connections Powering Up The Unit Using the StylusIntroduction First Steps Lock/Unlock General Operation and NavigationTouchscreen Navigation Key NavigationFunctions „Exit and „Edit Buttons Menu StructureStarting a Software Module Main MenuCamera Control Menu WRC-2 Settings MenuSettings Window Status Window Message & Warnings Field Following values and settings are displayed Battery VoltageStatus Window LDS e.g mm T1.9Choose from a preset camera speed Camera Control Menu Changing Camera SpeedEnter a user defined camera speed Add a user defined speed value Editing Preset Speeds & Change Camera DirectionDelete items from the preset list Add all default speed valuesChoose from a preset camera shutter angle Changing Camera Mirror ShutterEdit a specific camera shutter angle Editing Preset Camera Shutter Angles Add all default camera shutter valuesAdd a user defined shutter angle value Camera Control Menu Filmcounter Sub-Menu Camera Control Options Sub-Menu TCS Time Code Sensitivity Camera Control Menu Time Code Sub-MenuTo enter the Time Code Sub-Menu Time Code on/offTime / User Bits Lens Manager Menu Functions Using a Lens with Lens Data SystemUsing a Lens without LDS Lens Manager MenuAdd Iris Tables from the User Folder System Administer Iris Tables Create new Iris TablesLoad Iris Tables Remove Iris Tables from the User Iris ListStep MenuLens Manager Creating new Iris Tables with the Iris Table WizardName the Iris Table Intentionally left blank Ramp Control Menu Ramp Control Menu Enabling the Iris Control Programming a Ramp Mixed Compensation via Shutter and Iris Ramp Control Menu Exposure CompensationCompensation via the Mirror Shutter Compensation via the irisTo Enable the Exposure Calculation Exposure CalculationUse the Exposure Calculation Ramp Control Menu Compensation Free Style Enable „Compensation Free StyleSafe and Load a Ramp Save a Ramp Set to DefaultRamp Options Change Ramp DirectionRamp Control Menu Ramp Example External Display Menu Updating the WRC-2 AppendixFile Dialog Service Menu Exit from AppAdjusting the Knob Handwheel Cleaning Cleaning the TouchscreenAppendix Troubleshooting Communication ProblemsNo Speed setting available Intentionally left blank Operating Temperature Range Technical Data DimensionsWeight Power SupplyArri Service Index Index Page Index