ARRI instruction manual Appendix, Updating the WRC-2

Page 50

Appendix

16. Appendix

16.1 Updating the WRC-2

● Connect an USB Stick with the update software to the mini-USB connector „MEM“ of the WRC‑2. Use the provided adapter cable to adapt from an USB stick to the Mini-USB connector.

Main Menu

WRC Settings Menu

● Open the WRC-2 Settings Menu. ● Click „Service“.

● Click „SW Update“.

● Check if version from memory stick is displayed. If not, check USB stick connection.

● Click „Update“ to upload the new software.

● Click „OK“. The unit will boot with the new software.

Update Menu

Service Menu

50

Image 50

Contents WRC-2 Page Order Numbers Contents Change Ramp Direction Safety Instructions General Safety InstructionsSpecific safety instructions Disclaimer Disclaimer Introduction Introduction Receiving SetupTransmitting Mounting the WRC-2 on the WMU-3 or WMU-2 WRC-2 & Arricam Studio and Lite WRC-2 & Arriflex 435 Xtreme / AdvancedWRC-2 & Arriflex WRC-2 & other Arri CamerasWired Configurations Direct connection via the Camera ConnectorConnection via Universal Remote Controller URM-3 LCS CablesWRC-2 & Arricam Studio and Lite Possible Connections WRC-2 & Arriflex 435 Xtreme / Advanced Possible ConnectionsWRC-2 & Arriflex 416 Possible Connections Introduction First Steps Powering Up The UnitUsing the Stylus Key Navigation General Operation and NavigationTouchscreen Navigation Lock/UnlockFunctions Menu Structure „Exit and „Edit ButtonsMain Menu Starting a Software ModuleWRC-2 Settings Menu Camera Control MenuSettings Window Status Window LDS e.g mm T1.9 Following values and settings are displayed Battery VoltageStatus Window Message & Warnings FieldEnter a user defined camera speed Choose from a preset camera speedCamera Control Menu Changing Camera Speed Add all default speed values Editing Preset Speeds & Change Camera DirectionDelete items from the preset list Add a user defined speed valueEdit a specific camera shutter angle Choose from a preset camera shutter angleChanging Camera Mirror Shutter Add a user defined shutter angle value Editing Preset Camera Shutter AnglesAdd all default camera shutter values Camera Control Menu Filmcounter Sub-Menu Camera Control Options Sub-Menu Time Code on/off Camera Control Menu Time Code Sub-MenuTo enter the Time Code Sub-Menu TCS Time Code SensitivityTime / User Bits Lens Manager Menu Using a Lens with Lens Data SystemUsing a Lens without LDS Lens Manager Menu FunctionsRemove Iris Tables from the User Iris List Administer Iris Tables Create new Iris TablesLoad Iris Tables Add Iris Tables from the User Folder SystemCreating new Iris Tables with the Iris Table Wizard MenuLens Manager StepName the Iris Table Intentionally left blank Ramp Control Menu Ramp Control Menu Enabling the Iris Control Programming a Ramp Compensation via the iris Ramp Control Menu Exposure CompensationCompensation via the Mirror Shutter Mixed Compensation via Shutter and IrisUse the Exposure Calculation To Enable the Exposure CalculationExposure Calculation Enable „Compensation Free Style Ramp Control Menu Compensation Free StyleChange Ramp Direction Set to DefaultRamp Options Safe and Load a Ramp Save a RampRamp Control Menu Ramp Example External Display Menu Appendix Updating the WRC-2Cleaning Cleaning the Touchscreen Service Menu Exit from AppAdjusting the Knob Handwheel File DialogNo Speed setting available Appendix TroubleshootingCommunication Problems Intentionally left blank Power Supply Technical Data DimensionsWeight Operating Temperature RangeArri Service Index Index Page Index