ARRI WRC-2 instruction manual External Display Menu

Page 49

15. External Display Menu

The External Display Menu remote controls the camera menu and shows the same information as screened on the camera display.

Note: The External Display Menu can only be used with cameras provided with an LCD display.

(e.g. ARRIFLEX 435, 535, 16SR-3, 416).

Thus the External Display Menu can neither be used with ARRICAM Studio or ARRICAM Lite, nor with older ARRIFLEX cameras without an LCD display (e.g. SR-2, SR-1, BL-4 etc.)

●In the Main Menu click on the ikon „External Display“ to open the Menu.

●Click on „Mode“ to navigate to the next mode.

●To change a value: Click on „SEL“ until the desired value starts to flash.

●Click „Set“ to change the value.

●Wait until the value stops flashing or click „Mode“ to confirm the new setting.

Main Menu

External Display

External Display Menu

49

Image 49

Contents WRC-2 Page Order Numbers Contents Change Ramp Direction General Safety Instructions Safety InstructionsSpecific safety instructions Disclaimer Disclaimer Introduction Introduction Transmitting SetupReceiving Mounting the WRC-2 on the WMU-3 or WMU-2 WRC-2 & Arriflex 435 Xtreme / Advanced WRC-2 & Arricam Studio and LiteWRC-2 & other Arri Cameras WRC-2 & ArriflexDirect connection via the Camera Connector Wired ConfigurationsLCS Cables Connection via Universal Remote Controller URM-3WRC-2 & Arriflex 435 Xtreme / Advanced Possible Connections WRC-2 & Arricam Studio and Lite Possible ConnectionsWRC-2 & Arriflex 416 Possible Connections Using the Stylus Powering Up The UnitIntroduction First Steps Touchscreen Navigation General Operation and NavigationKey Navigation Lock/UnlockFunctions „Exit and „Edit Buttons Menu StructureStarting a Software Module Main MenuCamera Control Menu WRC-2 Settings MenuSettings Window Status Window Status Window Following values and settings are displayed Battery VoltageLDS e.g mm T1.9 Message & Warnings FieldCamera Control Menu Changing Camera Speed Choose from a preset camera speedEnter a user defined camera speed Delete items from the preset list Editing Preset Speeds & Change Camera DirectionAdd all default speed values Add a user defined speed valueChanging Camera Mirror Shutter Choose from a preset camera shutter angleEdit a specific camera shutter angle Add all default camera shutter values Editing Preset Camera Shutter AnglesAdd a user defined shutter angle value Camera Control Menu Filmcounter Sub-Menu Camera Control Options Sub-Menu To enter the Time Code Sub-Menu Camera Control Menu Time Code Sub-MenuTime Code on/off TCS Time Code SensitivityTime / User Bits Using a Lens without LDS Using a Lens with Lens Data SystemLens Manager Menu Lens Manager Menu FunctionsLoad Iris Tables Administer Iris Tables Create new Iris TablesRemove Iris Tables from the User Iris List Add Iris Tables from the User Folder SystemLens Manager MenuCreating new Iris Tables with the Iris Table Wizard StepName the Iris Table Intentionally left blank Ramp Control Menu Ramp Control Menu Enabling the Iris Control Programming a Ramp Compensation via the Mirror Shutter Ramp Control Menu Exposure CompensationCompensation via the iris Mixed Compensation via Shutter and IrisExposure Calculation To Enable the Exposure CalculationUse the Exposure Calculation Ramp Control Menu Compensation Free Style Enable „Compensation Free StyleRamp Options Set to DefaultChange Ramp Direction Safe and Load a Ramp Save a RampRamp Control Menu Ramp Example External Display Menu Updating the WRC-2 AppendixAdjusting the Knob Handwheel Service Menu Exit from AppCleaning Cleaning the Touchscreen File DialogCommunication Problems Appendix TroubleshootingNo Speed setting available Intentionally left blank Weight Technical Data DimensionsPower Supply Operating Temperature RangeArri Service Index Index Page Index