ARRI WRC-2 instruction manual Disclaimer

Page 8

Disclaimer

3. Disclaimer

Before using the products described in this manual be sure to read and understand all respective instructions. The Wireless Remote Control 2, WRC-2, is only availbale for commercial customers.

The customer grants by utilization, that the WRC-2 or other components of the system are only deployed for commercial use.

Otherwise the customer has the obligation to contact ARRI preceding the utilization.

While ARRI endeavours to enhance the quality, reliability and safety of their products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely.

To minimize risks of damage to property or injury (including death) to persons arising from defects in the products, customers must incorporate sufficient safety measures in their work with the system and have to heed the statuted canonic use.

No part of this document may be copied or reproduced in any form or by any means without written consent of ARRI. ARRI assumes no responsibility for any errors that may appear in this document.

The informations is subject to change without notice. For product specification changes since this manual was published, refer to the latest publications of ARRI data sheets or data books, etc., for the most up-to-date specifications.

Not all products and/or types are available in every country. Please check with an ARRI sales representative for availability and additional information.

Image 8
Contents WRC-2 Page Order Numbers Contents Change Ramp Direction Safety Instructions General Safety InstructionsSpecific safety instructions Disclaimer Disclaimer Introduction Introduction Receiving SetupTransmitting Mounting the WRC-2 on the WMU-3 or WMU-2 WRC-2 & Arricam Studio and Lite WRC-2 & Arriflex 435 Xtreme / AdvancedWRC-2 & Arriflex WRC-2 & other Arri CamerasWired Configurations Direct connection via the Camera ConnectorConnection via Universal Remote Controller URM-3 LCS CablesWRC-2 & Arricam Studio and Lite Possible Connections WRC-2 & Arriflex 435 Xtreme / Advanced Possible ConnectionsWRC-2 & Arriflex 416 Possible Connections Introduction First Steps Powering Up The UnitUsing the Stylus General Operation and Navigation Touchscreen NavigationKey Navigation Lock/UnlockFunctions Menu Structure „Exit and „Edit ButtonsMain Menu Starting a Software ModuleWRC-2 Settings Menu Camera Control MenuSettings Window Status Window Following values and settings are displayed Battery Voltage Status WindowLDS e.g mm T1.9 Message & Warnings FieldEnter a user defined camera speed Choose from a preset camera speedCamera Control Menu Changing Camera Speed Editing Preset Speeds & Change Camera Direction Delete items from the preset listAdd all default speed values Add a user defined speed valueEdit a specific camera shutter angle Choose from a preset camera shutter angleChanging Camera Mirror Shutter Add a user defined shutter angle value Editing Preset Camera Shutter AnglesAdd all default camera shutter values Camera Control Menu Filmcounter Sub-Menu Camera Control Options Sub-Menu Camera Control Menu Time Code Sub-Menu To enter the Time Code Sub-MenuTime Code on/off TCS Time Code SensitivityTime / User Bits Using a Lens with Lens Data System Using a Lens without LDSLens Manager Menu Lens Manager Menu FunctionsAdminister Iris Tables Create new Iris Tables Load Iris TablesRemove Iris Tables from the User Iris List Add Iris Tables from the User Folder SystemMenu Lens ManagerCreating new Iris Tables with the Iris Table Wizard StepName the Iris Table Intentionally left blank Ramp Control Menu Ramp Control Menu Enabling the Iris Control Programming a Ramp Ramp Control Menu Exposure Compensation Compensation via the Mirror ShutterCompensation via the iris Mixed Compensation via Shutter and IrisUse the Exposure Calculation To Enable the Exposure CalculationExposure Calculation Enable „Compensation Free Style Ramp Control Menu Compensation Free StyleSet to Default Ramp OptionsChange Ramp Direction Safe and Load a Ramp Save a RampRamp Control Menu Ramp Example External Display Menu Appendix Updating the WRC-2Service Menu Exit from App Adjusting the Knob HandwheelCleaning Cleaning the Touchscreen File DialogNo Speed setting available Appendix TroubleshootingCommunication Problems Intentionally left blank Technical Data Dimensions WeightPower Supply Operating Temperature RangeArri Service Index Index Page Index