26CONFIGURING YOUR OFFICECONNECT NETBUILDER 10 BRIDGE/ROUTER
bIn the AuthLocalUser field, enter the username and password for office B in quotes. For example, enter:
"OfficeB" "passwordB"
cClick Apply.
5In the Dial on Demand Dynamic Dial section on the navigation frame, click the PPP AuthRemoteUser link.
a In the start field, choose 4.
b In the AuthRemoteUser field, enter the username and password for office A in quotes. For example, enter:
"OfficeA" "passwordA" c Click Apply.
6Enable port control to establish PPP connectivity using access security.
a In the Dial on Demand Dynamic Dial section of the navigation frame, click the PORT CONTrol link.
b In the start field, choose 4.
c In the CONTrol field, choose Enabled.
Your OfficeConnect NETBuilder bridge/router configuration is complete.