Configuration Procedure | 13 |
■Configuring Dynamic Dial
■Configuring Network Addressing for Your Network:
■If your network uses the IP protocol, use the procedure in “Configuring IP Network Addressing” on page 20.
■If your network uses the IPX network protocol use the procedure in “Configuring IPX Network Addressing” on page 23.
■Configuring PPP Authentication
Additional configuration steps that need to be performed at Office B are included in “Configuring PPP Authentication” on page 24. To complete your set up, you will need to exchange certain information with your Office B partners.
Configuring ISDN Lines
If you are in North America, you can use the SPIDWizard to automatically detect your ISDN switch type and SPID values.
Configuring ISDN (In North America)
To configure your Office A in North America, follow these steps:
1Configure ISDN Dial on Demand.
In this procedure you will set the primary and secondary phone numbers as provided by your telecommunications carrier for the ISDN paths.
a In the navigation frame, click the Configuration link. b In the navigation frame, click the IP Routing link.
c In the Dial on Demand ISDN Setup section of the navigation frame, click the PATH LocalDialNo link.
d In the start field, click the arrow and choose 2.1.
e In the LocalDialNo field, enter the local dial number string in quotes. For example, enter:
"4085551001"
fClick Apply.