3Com 09-1632-000 manual Click Apply Conﬁgure the path switch type

Page 17

Conﬁguration Procedure

17

bIn the start ﬁeld, click the arrow and choose 2.1.

cIn the LocalDialNo ﬁeld, enter the local dial number string in quotes. For example, enter:

"4085551001"

dClick Apply.

eIn the start ﬁeld, click the arrow and choose 2.2.

fIn the LocalDialNo ﬁeld, ener the second local dial number in quotes. For example, enter:

"4085551002"

gClick Apply.

2Conﬁgure the path switch type.

aIn the Dial On Demand ISDN Setup section of the navigation frame, click the PATH SwitchType link.

ETSI is the default Switchtype conﬁgured. If you are provisioned by an ETSI ISDN Switch, then skip to step 3.

bIn the start ﬁeld, click the arrow and choose 2.

cIn the SwitchType ﬁeld, click the arrow and choose your switch type.

dClick Apply.

3Enable the ISDN paths.

a In the Dial On Demand ISDN Setup section of the

navigation frame, click the PATH CONTrol link. b In the start ﬁeld, click the arrow and choose 2.1.

cIn the CONTrol ﬁeld, click the arrow and choose Enabled.

dClick Apply.

Your ISDN line is now initialized.

4Logically assign the two ISDN paths to port 4.

a In the Dial On Demand ISDN Setup section of the navigation frame, click the PORT PAths link.

b In the start ﬁeld, click the arrow and choose 4. c In the PAths ﬁeld, enter 2.1, 2.2.

Image 17

Contents Part No -1632-000 Published May 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Page Configuring Your Officeconnect Netbuilder BRIDGE/ROUTER Prerequisites Set Up the NMS as a Dhcp Client Preconﬁguration Set UpInstall the OfﬁceConnect on a Tabletop Cable the Bridge/RouterCable the Serial Port Cable the Ethernet ConnectorCable the Isdn Port Turn on Power to the OfﬁceConnectRestart the NMS Dhcp Client Web Link Home Banner Navigation frame Main window Launch Web LinkPreconﬁguration Set Up Ofﬁce a Conﬁguration Conﬁguration ProcedureConﬁguring Isdn In North America Conﬁguring Isdn Lines4085551002 Enter the switch type Conﬁguring Isdn Outside North America Click Apply Conﬁgure the path switch type Conﬁguring Dynamic Dial 4085551212 T=BRI B=64 Conﬁguring IP Network Addressing Conﬁguring Network Addressing for Your NetworkClick Apply 0.0 !4 Conﬁguring IPX Network Addressing Ofﬁce a Conﬁguration Conﬁguring PPP AuthenticationOfﬁce B Conﬁguration Click Apply World Wide Web Site Online Technical Services3Com Bulletin Board Service 3Com Knowledgebase Web ServicesAccess by Analog Modem 3Com FTP SiteAccess by Digital Modem 3Com Facts Automated Fax ServiceSupport from Your Network Supplier 847 262Country Telephone Number Asia Paciﬁc Rim Support from 3ComEurope, South Africa, and Middle East Returning Products for RepairTo obtain an authorization number, call or fax OfﬁceConnect NETBuilder Bridge/Router 3Com Corporation Limited WarrantyWarranties Exclusive FCC Class a Verification Statement FCC Class B Statement FCC Declaration of Conformity 3COM END User Software License Agreement