Universal Electronics 4-DEVICE Universal Remote Control manual Using Macros

Page 26

USING MACROS

With programming,the MACRO key on your Atlas Universal Remote Control can be setup to perform repetitive, time- consuming operations through the press of a single key.

A macro can be used to control a home theater operation, to set a favorite channel, or for other multiple functions you would like to control with one key press (see exam- ples below). Moreover, the MACRO key can hold up to three macros with up to 15 key presses each. The macros are then activated, in the order they were stored, each time you press this key.

NOTE: If three macros are stored, programming a new macro will erase the first original macro. Thereafter, each new macro will overwrite the next original macro.

Example – Programming A Favorite Channel

With so many channels available through your cable provider, you can program a macro that directly selects a favorite channel with one key press.

For example, let’s assume your favorite cable programs are on channel 71. Use the following instructions to program a macro for direct access of this channel:

NOTE: This example assumes the TV tuner is connected directly to the cable line and not through a cable box.

1.On the remote control, press and hold SETUP until the last-selected device key blinks twice, then release SETUP.

2. Enter 9 - 9 - 5.

3. Press MACRO once.

4. Press TV once.

5. Enter the channel number, 7 - 1.

NOTE: If you have access to over 100 channels, enter 0-7-1. Moreover, if the original remote control required pressing an Enter key to change the channel, also press the ENTER key after the channel number (e.g., 0-7-1-ENTER).

6.Press and hold SETUP until the last-selected device key blinks twice, then release SETUP.

Now when you press MACRO, you will instantly see cable channel 71 on your TV set.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Atlas Cable 4-DEVICE Table of Contents Introduction Code library for popular video and audio devicesFeatures and Functions Use Guide to display the program guide Key ChartsUse Setup for all programming sequences Press Mute once to turn the sound off or on Use CH+ or CH- to select the next higher or lower channelInstalling Batteries Installing Batteries Programming Device ControlAUD TV/VCR MANUFACTURER’S Codes Setup Codes for Audio AmplifiersSetup Codes for Audio Receivers ABC Setup Codes for Cable ConvertersSetup Codes for DVD Players GPXSetup Codes for VCRs and PVRs CCEKLH HI-QKEC LXITMK NECSTS CXC Setup Codes for TVsAOC NAD JCBKTV NTCSSS Setup Codes for TV/VCR Combos Press Setup once to lock in the code Searching for Your CodeChecking the Codes Enter 9 8 2. The CBL key will blink four times Programming ID LockTurn on the cable converter Enter 9 8 2. The CBL key will blink twiceProgramming Channel Control Lock Enter 9 7 Press CH- once. The CBL key will blink four timesTo Operate The Master Power Key To Program The Master Power KeyTo Clear The Master Power Key Perform steps 1 and 2 in the above section Press Power onceRE-ASSIGNING Device Keys TV VCRUsing Macros Example Programming a Favorite ChannelTo Clear a Macro Changing Volume Lock To Unlock All Volume Control Global Volume UnlockTo Lock Volume Control To One Mode Global Volume Lock Solution TroubleshootingProblem Additional Information M4030 04/02
Top Page Image Contents