Universal Electronics 4-DEVICE Universal Remote Control manual Programming Channel Control Lock

Page 23

PROGRAMMING CHANNEL CONTROL LOCK

By default, the remote control’s channel-control capabilities are locked to the cable converter. The affected keys* are

0 ~ 9, CH+, CH-, ENTER, and LAST. This will guarantee that you do not inadvertently change a channel on your TV or VCR. However, you can de-activate this feature to allow full access to these keys in the TV and VCR modes.

*NOTE: This feature does not affect the AUD mode.

To De-Activate Channel Control Lock:

1. On the remote control, press CBL once. Then press and hold SETUP until the CBL key blinks twice, then release SETUP.

2. Enter 9 - 7 - 3.

3.Press CH- once. The CBL key will blink four times.

4.Now, the remote control will provide TV and VCR channel-control capabilities while in the TV or VCR mode.

To Re-Activate Channel Control Lock:

1. On the remote control, press CBL once. Then press and hold SETUP until the CBL key blinks twice, then release SETUP.

2. Enter 9 - 7 - 3.

3. Press CH+ once. The CBL key will blink twice.

4.Now, regardless of what mode you select (i.e., TV, VCR, or CBL), only the channel control capability of your cable converter will be accessible.

23

Image 23

Contents Atlas Cable 4-DEVICE Table of Contents Code library for popular video and audio devices IntroductionFeatures and Functions Use Guide to display the program guide Key ChartsUse Setup for all programming sequences Use CH+ or CH- to select the next higher or lower channel Press Mute once to turn the sound off or onInstalling Batteries Programming Device Control Installing BatteriesAUD TV/VCR MANUFACTURER’S Codes Setup Codes for Audio AmplifiersSetup Codes for Audio Receivers GPX Setup Codes for Cable ConvertersSetup Codes for DVD Players ABCCCE Setup Codes for VCRs and PVRsLXI HI-QKEC KLHTMK NECSTS CXC Setup Codes for TVsAOC NTC JCBKTV NADSSS Setup Codes for TV/VCR Combos Searching for Your Code Press Setup once to lock in the codeChecking the Codes Enter 9 8 2. The CBL key will blink twice Programming ID LockTurn on the cable converter Enter 9 8 2. The CBL key will blink four timesEnter 9 7 Press CH- once. The CBL key will blink four times Programming Channel Control LockPerform steps 1 and 2 in the above section Press Power once To Program The Master Power KeyTo Clear The Master Power Key To Operate The Master Power KeyTV VCR RE-ASSIGNING Device KeysExample Programming a Favorite Channel Using MacrosTo Clear a Macro To Unlock All Volume Control Global Volume Unlock Changing Volume LockTo Lock Volume Control To One Mode Global Volume Lock Solution TroubleshootingProblem M4030 04/02 Additional Information